|
| EFFairmontTurbo |
|
||
|
Can the Au VCT SOHC or Barra DOHC heads fit onto the ef block, i know the BA's are taller and wider but if anyone knows exact dimensions etc or if a full conversion would be necessary... also if an xr6T conversion to a SOHC I6 is feasible (turbo,manifolds,intercooler etc)
cheers 
_________________________________________ No Its not turbocharged..........YET!!!! 
|
||
| Top | |
||
| mickysacca |
|
|||
|
AU i think is possible, but BA way too much effort for little gain required
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
the BA head will fit but u need the BA timing cover etc and water pump
also it has coil on plug ignition and twin VCT also the exhaust is different basically u will need aftermarket ECU to control it all all for a little gain be bette off putting a BAXr6t motor in the AU head will fit without problems ( non VCT ) but u will need to use AU rocker gear and cam
_________________ RIP SCOTT |
|||
| Top | |
|||
| jonbays |
|
||
|
The AU is a straight swap the AU VCT is possible with timing cover and other accessories and ECU cahnges to go with iot the BA is pretty well out of the question.
|
||
| Top | |
||
| EFFairmontTurbo |
|
||
|
What about a BA turbo conversion is that possible...
Are the manifolds the same and how much (new or second hand), or would a custom setup be better. Cheers!
|
||
| Top | |
||
| Disco Frank |
|
|||
|
EFFairmontTurbo wrote: What about a BA turbo conversion is that possible...
Are the manifolds the same and how much (new or second hand), or would a custom setup be better. Cheers! you can put a complete BA into a pre ba but it is BIG$$ and a new aftermarket ECU is needed cost vs power a turbo setup is more benificial and cost effective also a new K frame is needed or modification
_________________ RIP SCOTT |
|||
| Top | |
|||
| EFFairmontTurbo |
|
||
|
but what about just the turbo, intercooler, manifolds etc.... will they bolt on to the EF I6..........
cheers
|
||
| Top | |
||
| Spider_GT |
|
|||
|
exhaust manifold wont but you can just cut the flanges of a stock exhaust manifold and wield the turbo manfild on
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: AveryWells, Facebook [Bot] and 21 guests |
