|
| altedxr6 |
|
|||
|
As the topic says, does it?
|
|||
| Top | |
|||
| voxace |
|
|||
|
Yeah, easy as.
Just need the usual shims etc... |
|||
| Top | |
|||
| altedxr6 |
|
|||
|
Any power differences? .. etc? .. I've heard good and bad things about wade cams in XR6 Motor's ..
|
|||
| Top | |
|||
| Striker |
|
||
|
Yeah it does.
Where are you getting a 1004@114 from? I wanted one of those for my car, but all I could find going cheap was a 112. Puts a little lump in the idle. --Striker.
_________________ Vice President, [url]FastFords.org[/url] Car Club. |
||
| Top | |
||
| sickd |
|
|||
|
i got 1004 14 i was actually looking for 1004 12 but got the 14 and its tops i needed shims for the lifters you need to put 2 standard shims behind each lifter talk to wade they let you know, been in for a year now and its sweet heaps of gain for price
_________________ BA XR8 BOSS 260
|
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
yeah it fits
but don't expect a fast car after you do it. mine went 0.5 sec slower down the strip after fitting one. so i took it out again. |
||
| Top | |
||
| altedxr6 |
|
|||
|
tickford_6 wrote: yeah it fits
but don't expect a fast car after you do it. mine went 0.5 sec slower down the strip after fitting one. so i took it out again. Yeah, thats what i meant by good and bad stories about it .. |
|||
| Top | |
|||
| mrnasty |
|
|||
|
well mine definatly goes faster with the 1004-14 in, thats with extractors and exhaust and cold air. hit 2500rpm and look out. i just put in an interceptor ECU and HP4 chip, makes things even more fun. but mines not an XR6 though.
_________________ Cougar Zero makes my pants fit nice. |
|||
| Top | |
|||
| sickd |
|
|||
|
mrnasty wrote: well mine definatly goes faster with the 1004-14 in, thats with extractors and exhaust and cold air. hit 2500rpm and look out. i just put in an interceptor ECU and HP4 chip, makes things even more fun. but mines not an XR6 though.
what chip is it who makes it ?
_________________ BA XR8 BOSS 260
|
|||
| Top | |
|||
| Fakertaker |
|
|||
|
I too have heard good and bad reports from these cams.
The standard XR cam is reallly focused on mid range gain, the wade cam may not be (anyone???)... That would explain a small drop in speed, especially in automatics. Maybe with the rest of the motor flowing better you would get good gains from the wade, like mrnasty.
_________________ Oversteer - The only way to steer |
|||
| Top | |
|||
| fuzion |
|
||
|
Theres an easy solution, ask Keith @ Wade Cams for a cam with an earlier exhaust open for the auto, so bit more lower/mid then top...
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
