|
| stomper |
|
|||
|
Hey guys...
Is it possible to fit a EA T5 to my EF? Reason i ask is because T5 conversions are hard to come by and i can get a EA S Pack with a 5 speed and a LSD really cheap. I know ECU's are different but is it as simple as changing the trans over or will a bell housing need changing. Also it has a LSD. Can i fit this to the EF. Being a GLi it DOES HAVE ABS. Is it a straight fit in? Can i just swap the axels over so its abs compatiable. cheers
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| twase |
|
|||
|
Yes it is possible, things to note are the EA box has a lower first so it may be annoying , there is no reverse syncro on the EA not a biggie either and the flywheel has less bolts and a smaller diameter clutch plate but unless you are chasing big HP it should not be an issue. The ea pedal box requires some mods to get it into an EF.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| rushed |
|
|||
|
im doing it next week, have had the conversion for ages now im putting it together.
get an ef flywheel (6 bolt as opposed to the 3 bolt ea) though, as it allows you to use better ef/el clutches. pedal box will fit with "some adjustment" or get the pin kit. |
|||
| Top | |
|||
| stomper |
|
|||
|
OK so i just need a EF Flywheel. Can i use the auto flywheel?
So i can use the EA flywheel BUT i will ony be able to use 3 of 6 bolts? What are 'some adjustments' i have to do to the pedal box?
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| stomper |
|
|||
|
OK so i just need a EF Flywheel. Can i use the auto flywheel?
So i can use the EA flywheel BUT i will ony be able to use 3 of 6 bolts? What are 'some adjustments' i have to do to the pedal box?
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| naughtyfalcon |
|
|||
|
auto flex plate,,i don't think so,,take a look at the two side by side and you'd understand why...
_________________
|
|||
| Top | |
|||
| twase |
|
|||
|
{USERNAME} wrote: OK so i just need a EF Flywheel. Can i use the auto flywheel?
So i can use the EA flywheel BUT i will ony be able to use 3 of 6 bolts? What are 'some adjustments' i have to do to the pedal box? No you can't use the Auto flywheel but the 3 bolter will be fine. See here for the pedal box detail. http://www.fordmods.com/forums/viewtopic.php?t=39358
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| stomper |
|
|||
|
{USERNAME} wrote: auto flex plate,,i don't think so,,take a look at the two side by side and you'd understand why...
Pics dont work... So i pull the EA clutch pedal out and i can mod a EF pedal box to take the EA clutch pedal. Also i can use the EA flywheel, but its worth getting a EF/EL one and clutch.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| naughtyfalcon |
|
|||
|
the peddle box should be ok so long as it's been strenthened,,,the fly wheel should be ok but the more bolts the stonger it will be...
_________________
|
|||
| Top | |
|||
| rushed |
|
|||
|
you can use the manual ea flywheel and clutch, they have 6 crank bolts, but onnly 3 bolts holing the pressure plate, wheras the ef/el has 6 pressure plate bolts, thats the differance.
the auto/manual flywheels are TOTALY differant, the manual one is about 1cm thincker, even the crank bolts are differant, ie longer. |
|||
| Top | |
|||
| twase |
|
|||
|
{USERNAME} wrote: the auto/manual flywheels are TOTALY differant, the manual one is about 1cm thincker, even the crank bolts are differant, ie longer. This one may byte  me, I did not get the crank bolts with my conversion I had assumed they are the same manual to Auto, has anyone used the auto bolts on a manual flywheel?
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| stomper |
|
|||
|
awesomework guys. Ill have a loo when i get the car but i wanted to seeif it would work before i go out and spend $500 on a car to get a trans that wont work...
What about the ECU side of things. Isnt there a Hack to make a auto a manual. Maybe ill send a ecu off to data-mine for a reprogram.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| twase |
|
|||
|
Just two resistors will make the Auto ECU happy with a manual box.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| stomper |
|
|||
|
{USERNAME} wrote: Just two resistors will make the Auto ECU happy with a manual box.
What two resistors and where?
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| snap0964 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: the auto/manual flywheels are TOTALY differant, the manual one is about 1cm thincker, even the crank bolts are differant, ie longer. This one may byte me, I did not get the crank bolts with my conversion I had assumed they are the same manual to Auto, has anyone used the auto bolts on a manual flywheel?And of course use Loctite 262 or similar when tightening them.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
