|
| EL__Fairmont |
|
|||
|
The biggest improvent i found in fitting various exhaust components. Was when i had the modified ford cat replaced with a high flow item.
I already had pacies and redback exhaust on the car. Noticed more power with the high flow cat then when i got the pacies and exhaust put on. And a cleaner, crisper exhaust note while under hard acceleration.
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| Falcon-enthusiast |
|
|||
|
{USERNAME} wrote: The biggest improvent i found in fitting various exhaust components. Was when i had the modified ford cat replaced with a high flow item.
I already had pacies and redback exhaust on the car. Noticed more power with the high flow cat then when i got the pacies and exhaust put on. And a cleaner, crisper exhaust note while under hard acceleration. hmm interesting, just what i was wondering about nice job |
|||
| Top | |
|||
| samftr |
|
|||
|
I have just gotten a system fitted to my ef falcon which had the original exhaust fitted still (yeah 346000km)
The car at that point made 117.7 kw at the treads. two weeks ago I got a cat back system fitted Mandrel bent rear section (berklee I think) Higher flow cat than standard *had that on the car for 12 months from another eb hehe berklee muffler all 2.5 inch stuff, the front meter of pipe there was press bent but its only 4 bends and they are only slight. IT SOUNDS PHAT 
Now the car makes 131.02 kw at the treads.. Saturday night should see what difference performance wise it has made! cost me 260 bucks
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| nvk-351 |
|
||
|
What do you guys think about a cat back 2'5" mandrel bent system with two straight through supercat mufflers? These are the systems that you can buy off ebay.
Thanks
_________________ EF 96 5 speed, Wades Cam, Extractors, 2'5 Straight through exhaust, High flow injectors, Cold air intake, Adjustable Fuel Pressure Regulator, 17's lowered on SSL King Springs... |
||
| Top | |
||
| twr7cx |
|
|||
|
the first few replies to this thread are pure and utter s**t!
There is not just one redback or one lukey system avaliable to compare the sounds. Both brands, but Lukey in particular, offer a variety of mufflers, resinators and hot dogs, and different combinations of these will cause different results. |
|||
| Top | |
|||
| nvk-351 |
|
||
|
OK I fitted 2nite a Supercat Cat back Mandrel exhaust 2'5" with two straight thru mufflers. Now i wasnt expecting much but it really sounds good a nice deep fat note and up high it growls. This is the exhaust off ebay from RPM_Supermart. I give it top marks for value sound and performance.
Anyone who says otherwise better have good reason because for anyone wanting to buy a good exhaust at a good price i rekon u cant beat it.
_________________ EF 96 5 speed, Wades Cam, Extractors, 2'5 Straight through exhaust, High flow injectors, Cold air intake, Adjustable Fuel Pressure Regulator, 17's lowered on SSL King Springs... |
||
| Top | |
||
| samftr |
|
|||
|
what did it cost you?
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| nvk-351 |
|
||
|
It costed me $275 plus 44 bux postage to vic from NSW so i think that is not too bad. Are you thinking of getting one? because they are worth it mine really sounds nice.
_________________ EF 96 5 speed, Wades Cam, Extractors, 2'5 Straight through exhaust, High flow injectors, Cold air intake, Adjustable Fuel Pressure Regulator, 17's lowered on SSL King Springs... |
||
| Top | |
||
| samftr |
|
|||
|
no dude, i got mine fitted for 260 bucks. with flange plates so that I can fit it up to another falcon if I need to. so its able to fit anything from an ea - au3 with live axle a*** end.
mandrel bent too.
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| sikford |
|
|||
|
dude.im gettin an exhaust with a single offset centre muffler and mandrel bent pipe.all one pipe.with twin 3" tips for like 350 and i reckon it'll be loud.deep.should growl at revs
_________________ THE Fairmont Ghia : 75th Anniversary LE |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Some places you can get cheap zorsts.
Others you cant. I could only get $360 fitted as the cheapest. |
|||
| Top | |
|||
| twr7cx |
|
|||
|
dang you people are getting riped hard! $250 is base price around here!
|
|||
| Top | |
|||
| samftr |
|
|||
|
i drove down to all go on the gold coast he does good work there. good bloke too and does good quality work there too
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| samftr |
|
|||
|
is that for a mandrel bent system or a press bent system.
I also paid a bit more for bolt up flanges and the extra welding etc involved.
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| sikford |
|
|||
|
just get them to custom make one.tell em what u want.so much easir.mine cost so much becaus the tip was like 100 bucks.f**k ace though.
_________________ THE Fairmont Ghia : 75th Anniversary LE |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
