|
| InspectorRectum |
|
||
|
Thanks guys! Phongus I'll read through all the chain tensioner info and go from there. I would love to pull it all apart and clean everything and do it right, but fear that my knowledge and patience will hold me back.
I think I have all the infomation available now to get this done, couldnt have done it without yous. I do have one last question though, if I'm going to be lazy and hurry this along- how do I get the original gear back on without loosening the chain? Is it impossible? |
||
| Top | |
||
| TROYMAN |
|
||
|
{USERNAME} wrote: Thanks guys! Phongus I'll read through all the chain tensioner info and go from there. I would love to pull it all apart and clean everything and do it right, but fear that my knowledge and patience will hold me back.
I think I have all the infomation available now to get this done, couldnt have done it without yous. I do have one last question though, if I'm going to be lazy and hurry this along- how do I get the original gear back on without loosening the chain? Is it impossible? at this stage the chain tensioner needs to be released there is no way around it 
|
||
| Top | |
||
| TROYMAN |
|
||
|
as it seems that you havnt done this before.
being a cms cam im assuming its a re-grind?? have fitted the shims in the lifters??? |
||
| Top | |
||
| InspectorRectum |
|
||
|
 gonna be a long night... hope you guys had an easy monday 
|
||
| Top | |
||
| InspectorRectum |
|
||
|
{USERNAME} wrote: as it seems that you havnt done this before.
being a cms cam im assuming its a re-grind?? have fitted the shims in the lifters??? !!!!!!!! thanks for reminding me!! lol that would have been nasty 
|
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
pm sent
|
||
| Top | |
||
| InspectorRectum |
|
||
|
thanks, just have to set up a true blue account.
where abouts is the tensioner bolt assembly thing? does the power steering pump have to be removed? could anyone do a pic up or something? |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
{USERNAME} wrote: where abouts is the tensioner bolt assembly thing? does the power steering pump have to be removed? DUDE no offence but ive mentioned it a few times !! {USERNAME} wrote: yep, remove the power steering pump and its bracket and move them out of the way, then you can follow the other thread on how you lock up & release the tensioner. {USERNAME} wrote: Secondly as mentioned, theres a self tensioner on the chain, which is accessed behind the power steering pump. {USERNAME} wrote: To get to the tensioner you have to unbolt the power steering pump and its bracket and move it out of the way
|
||
| Top | |
||
| InspectorRectum |
|
||
|
sorry mate, jumping all over the place with what to do didnt help.
thanks!!! Last edited by InspectorRectum on Mon Nov 10, 2008 10:53 pm, edited 2 times in total. |
||
| Top | |
||
| Gaz |
|
||
|
It won't lift because there are guide dowels that will be in tight,
the way i do it sometimes is to actually grab a rocker arm with my hands and lift them from the lifter end and use them as a lever on the cam, won't do it any harm.
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
{USERNAME} wrote: sorry mate, didnt grasp a hold on that concept so I just spat out another Q.
on a roll now though, new shims are in and the rest will be done shortly.thanks!!! do you know how to remove the belt, before you unbolt the power steering pump? |
||
| Top | |
||
| InspectorRectum |
|
||
|
{USERNAME} wrote: It won't lift because there are guide dowels that will be in tight,
the way i do it sometimes is to actually grab a rocker arm with my hands and lift them from the lifter end and use them as a lever on the cam, won't do it any harm. you sur bout that? |
||
| Top | |
||
| InspectorRectum |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: sorry mate, didnt grasp a hold on that concept so I just spat out another Q. on a roll now though, new shims are in and the rest will be done shortly.thanks!!! do you know how to remove the belt, before you unbolt the power steering pump? yeah can do that, just about to start actually. i wont be able to finish this tonight cause i need lifter rubbers as well as a rocker gasket but im gonna do what i can -are the lifter rubbers readily available at supercheap or ford or do they have to be ordered? |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
you mean the plastic clip which holds the 2 major parts of the lift together (retainer) ?
if so, theyre hard to find. Ford dont sell them separate, ask "Macxr8" a member here, he might be able to help you. Some people just refit the lifters without the clips, just use tape around the rocker arm/lifter to hold it all together until you start tightening the rocker gear bolts down enough then you can remove the tape. |
||
| Top | |
||
| InspectorRectum |
|
||
|
but for the purpose of future reference, how do you remove the belt?
[Link below is sh!thouse, this thread explains it in detail: http://www.fordmods.com/forums/remove-t ... 71866.html] Last edited by InspectorRectum on Tue Nov 11, 2008 5:04 pm, edited 1 time in total. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |