
			
  | 
	
| elxr6maniac | 
				
  | 
		||
				
  | 
			
					 
							
							Ok so I have recently purchased an xh longreach ute, it has a tickford head and engine number is VR2A-6015-AB. Is it an xr6 motor or have they just bolted a tickford head it? cheers						
						
						
												 
				 | 
		||
| Top |   | 
			||
| ranga83 | 
				
  | 
		||
				
  | 
			
					 
							
							Vr engine number will be a hybrid block. Whats the cast number on the head?						
						
						
								
							 
				
 _________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics.  | 
		||
| Top |   | 
			||
| SWC | 
				
  | 
		||
				
  | 
			
					 
							
							Head should have a "T" cast into the front of it. 
				Bolting a Tickford head to the block makes it the same as the XR6 Engine. Bottom ends are the same through the series, only difference is; 1) Cam 2) Head 3) Fuel Reg 4) ECU 5) Exhaust and Suspension if you want to get picky apart from the front bar and body fit if fitted.  | 
		||
| Top |   | 
			||
| elxr6maniac | 
				
  | 
		||
				
  | 
			
					 
							
							93DT is on the head						
						
						
												 
				 | 
		||
| Top |   | 
			||
| SWC | 
				
  | 
		||
				
  | 
			
					 
							
							93DT is a Tickford Head.						
						
						
												 
				 | 
		||
| Top |   | 
			||
| SWC | 
				
  | 
		||
				
  | 
			
					 {USERNAME} wrote: Ok so I have recently purchased an xh longreach ute, it has a tickford head and engine number is VR2A-6015-AB. Is it an xr6 motor or have they just bolted a tickford head it? cheers If the block is cast VR2A then it is a Hybrid block. If it is fitted with the 93DT Head, the I would say that the head has been fitted to the block at sometime, probably to replace a stuffed original head or as an upgrade.  | 
		||
| Top |   | 
			||
| elxr6maniac | 
				
  | 
		||
				
  | 
			
					 
							
							So the 93DT is the ED XR head? Also anything special about the hybrid block? It is running like s**t, it has a bad miss down low, ive just done a 5 speed conversion in it and will get a j3 chip next week. I assume it's running like that because of ecu, and fuel regulator? Cheers for the comments guys						
						
						
												 
				 | 
		||
| Top |   | 
			||
| snap0964 | 
				
  | 
		|||
				
  | 
			
					 
							
							I don't think the 93DT heads have larger exhaust valves like the later 94/95DT heads.						
						
						
								
							 
				
 _________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl  | 
		|||
| Top |   | 
			|||
| Who is online | 
|---|
Users browsing this forum: No registered users and 49 guests  |