|
| kato |
|
||
|
Had my car dynoed yesterday and made 162 rwkw's my mods are listed in my signature below, still running 19lb injectors the air/fuel ratio was 13.5 which is getting a bit on the lean side, do you think there is more power to be had if I fit my 24lb injectors with a 73mm c&l maf calibrated to suit the 24's???
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| The Dog |
|
|||
|
Should be lots more there. Sounds like you need a flash tuner put thru the ECU. Chrisreddens au has the same cam etc and it is up near 200rwkw
_________________ You'll ride a black tornado across the western sky
|
|||
| Top | |
|||
| xr8ute |
|
||
|
I first made 161rwkw after fitting the 2030 to my otherwise stock AU XR8 (185kw series 1), so sounds about right for your EF.
I was running 14.5's (with an automatic) all day long with that power. I would expect your EF is lighter than my ute?? 13.5 seems pretty lean. Fit the MAF and injectors, and if you can afford it, get a custom chip from someone like Chiptorque to suit. SHould put you closer to 180-200rwkw depending on the rest of your combo... |
||
| Top | |
||
| prydey |
|
|||
|
i have a touch under 160 (158.4) and i'm still running e7 heads. they are ported but i would've thought you would get a bit more power than that with the gt40p's. i have a crane cam but don't know what as i haven't done any of the work to the car. i am running microtech though so i reckon if you chip yours or run aftermarket ecu you should get a nice improvement.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| fairy v8 |
|
||
|
i just had mine done 2 ,au 185 stock heads and cam usual bolt ons made 146 rwk but noticed it valve bounced at 5000, which limited it and thats with 1.72 r\r so i think springs are pretty limiting mines only done 90 ks
 dont know if youve done yours, ive got a cam and doble springs goin soon
|
||
| Top | |
||
| XR9UTE |
|
||
|
Did the dyno operator measure your injector duty cycle?
Pete. |
||
| Top | |
||
| JaSeY |
|
||
|
did you run a 14.5 with an auto EF XR8 with 162rwkw?
|
||
| Top | |
||
| Jaysen |
|
|||
|
I made 145rwkw on std E7's, EL GT extractors and an explorer manifold
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| kato |
|
||
|
I think I'll fit the injectors & maf and see how I go.
_________________ EF XR8 5spd: 302ci /178rwkw |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
