|
| Scaffy |
|
|||
|
Can anyone tell me if by using a block with 8.7" deck height, I'd run into trouble clearing the bonnet in an EL? Also, what would be the maximum stroke you could run in one?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
I dont see having a bennet clearance issue unless u use a tall manifold and using a 8.7 deck block means ur off the shelf manifolds wont bolt straight on, u will have to do some machining to get it to fit. I think u may have issues with off the shelf extractors as well but i think there is room for them to move up closser to the chassic anyway.
I was looking at that block as well and for the trouble it may cause its not really worth it. 363 8.2" 4.125 bore 3.5crank 5.4 rods and a set of AFR205 with a hydrolic roller will see you over 500hp
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Scaffy |
|
|||
|
Yeah, I was doing a heap of reading lastnight and you're right. It definately looks to be a PITA. Which block would you be running the 3.5 stroke? I'm looking at the Dart sportsman. I thought the max stroke on that was 3.4? That's what gets the 363.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
You can order a Sportsman Block in 8.2 deck with 4.125 bores. Stock strke these come out at 330odd cubes and a 347 crank will get you 363 on that bore
Should set you back about 3500. High Performance World here in Sydney have one in stock Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| BOTTLEDUP |
|
|||
|
{USERNAME} wrote: You can order a Sportsman Block in 8.2 deck with 4.125 bores. Stock strke these come out at 330odd cubes and a 347 crank will get you 363 on that bore Should set you back about 3500. High Performance World here in Sydney have one in stock Brett ...And add $200 odd freight to WA don't forget. Last time I checked HPW had them for about 3800 or so. I've got a 4.00" bore 8.200" DART Sportsman in stock if anyone is interested. 
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| One Drone |
|
|||
|
With a world products block at 4.125 x 8.2" and the right pistons you can get up to 371. Wouldn't have to modify the bonnet as it is still similiar to standard block height.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| 67RCE |
|
||
|
One Drone, the 302 is an 8.2" deck height block standard, 9.2" for 351 and aftermarket are 8.2"/8.7"/9.2"
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| One Drone |
|
|||
|
I know it's standard, what I am suggesting is that if you don't want to have to modify the bonnet as a result of a block with a higher deck, you can get standard blocks that can stroke to 371.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| millard455 |
|
|||
|
{USERNAME} wrote: You can order a Sportsman Block in 8.2 deck with 4.125 bores. Stock strke these come out at 330odd cubes and a 347 crank will get you 363 on that bore Should set you back about 3500. High Performance World here in Sydney have one in stock Brett shop around but, pavtek were doing a short motor using the sportsman block for 5grand when i started looking round a few months back but i cant comment on the quality of work. what cubes are you going for scaffy? im saving my pennies atm to head down the 363 path with a sportsman block.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
You have to add spacers to inlet or as said custom manifold..
The 8.7 shouldn't add too much height that it cannot be fitted.. Depending on inlet height .. Some just make custom boxed upper with extended lower by adding trumpets, extending ports so torque isn't lost..Lower version of the TE50 inlet.. I doubt exhaust would suffer too much ?? Nothing that cannot be heated alittle and bent anyway..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
You have to add spacers to inlet or as said custom manifold..
The 8.7 shouldn't add too much height that it cannot be fitted.. Depending on inlet height .. Some just make custom boxed upper with extended lower by adding trumpets, extending ports so torque isn't lost..Lower version of the TE50 inlet.. I doubt exhaust would suffer too much ?? Nothing that cannot be heated alittle and bent anyway..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Scaffy |
|
|||
|
NOt worrying about the 8.7 deck now. Was just curious. I've got my eye on a World block with 4.125 bore, but I'm thinking of using the 331 crank which will get me 347ci. Apparently this should produce a much smoother engine. Only problem with this block I'm looking at is the Cleveland mains, meaning sourcing a crank is a PITA. Anyone know where I can get one? Am waiting to hear back from World about them, but interested to know if anyone else supply them.
Looks like I'll need 351 dizzy and sump to run this block. Will it fit in my car with that sump?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Eagle and Scat make them.. Ring around..
VPW, Rocket etc.. The smaller main is better...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Scaffy |
|
|||
|
Yeah, but the price on this block is really good... the only reason I'm trying to make it work.
I'm not too sure about the 351 sump though. Will this fit in an EL?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
on that block I hope you are intending on using the std 351 sump ??
Atleast use the Hi Energy sump.. They will know what fits... You may have to grind 12mm off each side of your crossmemeber for extra clearance..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
