|
| EL2XR8 |
|
|||
|
Hi guys, would these be the same for a V8 or I6 EF/EL, and what else would be needed besides the buttons for an adding cruise to an ELV8 with ABS.
Thanks. http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :IT&ih=006 http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :IT&ih=005
_________________ EL II XR8
|
|||
| Top | |
|||
| Walker |
|
|||
|
You wont need anything as above mentioned, if it's manual you will need the switch and loom for the clutch but that's not expensive.
You will also need to buy a throttle cable for the cruise module to suit the 8. Otherwise it's plug and play. |
|||
| Top | |
|||
| EL2XR8 |
|
|||
|
It's an auto, so just the cable, module and buttons? what about any wiring loom/s.
thanks.
_________________ EL II XR8
|
|||
| Top | |
|||
| Walker |
|
|||
|
Nah, seeing as you are ABS equipped then the loom is already laying there where the module bolts up.... Without ABS then you need to wire in the loom.
The steering controls also plug straight in. |
|||
| Top | |
|||
| EL2XR8 |
|
|||
|
thanks walker, so buttons, module and v8 cable is all i need?
_________________ EL II XR8
|
|||
| Top | |
|||
| Walker |
|
|||
|
Yeah that's basically it.
I fitted mine years ago but that was a non ABS manual so there was a lot more to it. I fitted one for a guy which was EL ABS auto, that's all it needed. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
