|
| pumpdogg |
|
||
|
I am just wondering does, anybody have any tips for priming a v8 ef oil pump. I am rebuilding the engine and a unsure what to do, on my old car (holden v8) i just packed the pump with grease and that did the trick so could i do something similar, any help would be appreciated.
cheers justin.
_________________ Let the xr8 collecting begin!!! |
||
| Top | |
||
| XR9UTE |
|
||
|
Pull the dizzy out and use a looong 1/4" socket to turn the pump shaft with a speed brace until you have oil pressure.
|
||
| Top | |
||
| Krytox |
|
|||
|
old gas bottle, fill with water, weld in a air tyre valve. fill with oil, stick in a steel rod modified to fit the bottle and sealed, attach a pipe with a tap on it, charge it up, stick the pipe end into the oil switch hole, presto, pre-primed oil galleries!
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ozrunner |
|
||
|
Use a powerful drill with a reverse gear and an extension with suitable socket taped to it and when the oil exits the pushrods give it a few more seconds etc.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
