|
| shoey50 |
|
||
|
well pulled my manifold off to find this not real happy
 
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Fixable, but a huge pain in the a**
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| EB-5LTR |
|
||
|
reflex in campbellfield do manifold welding. Should cost about $40 to fix
|
||
| Top | |
||
| shoey50 |
|
||
|
really? i was gonna call it a write off so it can be welded?
|
||
| Top | |
||
| Sturmovik |
|
|||
|
Yeah piss easy if the guy knows what he is doing
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| Sturmovik |
|
|||
|
Have you got the lower out aswell? Might be easier for the welder to bolt the manifold onto the lower and weld it complete so it doesnt warp and is flush.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| shoey50 |
|
||
|
nah havnt got the lower off and didnt realy wanna take it off either might have to ask a couple of mates who are welders what they think
|
||
| Top | |
||
| Froudey |
|
||
|
get some alloy "need-it" you'll be right
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Sturmovik |
|
|||
|
{USERNAME} wrote: get some alloy "need-it" you'll be right Youd be surprised....Ive seen a part of a cast iron block epoxy glued and it held up for years
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| Froudey |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: get some alloy "need-it" you'll be right Youd be surprised....Ive seen a part of a cast iron block epoxy glued and it held up for years I had some need-it replacing a worn hard to get to welsh plug on my skyline, they do hold up to heat and alike and do infact last years.
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| DougM |
|
||
|
Exactly the same thing happened to mine!!!
Cost me $50 to get it welded and have the face machined true.........No big deal......Although I did panic at first and various wreckers were quoting $350 for the upper!!!!! |
||
| Top | |
||
| shoey50 |
|
||
|
cost me 50 to get it welded today i spent a hour filing it and making sure it was level then bam cracks again it must be up the s**t real bad gonna have to get the upper and lower milled i think, oh my must this engine fight me the whole friggin way!!!
|
||
| Top | |
||
| Sturmovik |
|
|||
|
Take it back, a proper weld shouldnt have cracked again.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
{USERNAME} wrote: cost me 50 to get it welded today i spent a hour filing it and making sure it was level then bam cracks again it must be up the s**t real bad gonna have to get the upper and lower milled i think, oh my must this engine fight me the whole friggin way!!! your not over tightening the bolts are you???? |
||
| Top | |
||
| shoey50 |
|
||
|
nah hardley tightened it at all, and i was being real carefull with it cause i knew it might be a problem
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
