Fordmods Logo

HELP injector change 

 

Page 2 of 2 [ 20 posts ] Go to page Previous  1, 2

 
 Post subject: Re: HELP injector change
Posted: Sun Jun 03, 2012 2:12 pm 
Oompa Loompa
Offline
User avatar

Age: 56

Posts: 26

Joined: 11th Jun 2005

Gallery: 11 images

Ride: SVT Cobra S/C 4.6 4V - 440bhp

Location: MEL & SFBA
VIC, Australia

I think you'll find that the BOSCH P/N : 0280-155-903 (Ford # XS2E-B5A) are rated at;
> 19.87 lbs/hr (150.2 g/min) for Heptane fuel &
> 21.78 lbs/hr (164.7 g/min) for Petrol.

both at 43.5 lbs/sq.in (3 bar - 300kPa) pressure.

To get 24 lbs/hr flow (for petrol) from these injectors you need to be running 53-54 lbs/sq.in fuel pressure.

Note : An injector flow rating is mostly a function of the specific gravity (http://en.wikipedia.org/wiki/Specific_gravity) of the fluid/liquid & the fuel pressure.

If you connected this injector to a fluid source at a constant pressure of 3 bar or 43.5 lbs/sq.in & kept the injector open, it would flow 21.78 lbs of petrol in an hour (or 150.2 grams in a minute). Because different fuels, weigh differently for the same volume (specific gravity) the flow rate will vary for a given injector.

Hence, the different flow ratings for different fuels.

Hope this helps.

 

_________________

____________________________________________
1972 XA GT351 [RPO83] - (1 of 259)

1997 EL GT - (1/240 AU Production Models)
2000 SVT Cobra R - LHD (1/300)
2003 SVT Cobra [10th Anniversary] - LHD (1/242) 330rwkW
2014 Shelby GT500 - LHD 495rwkW______________

Last edited by legt on Sat Jun 08, 2013 11:05 am, edited 2 times in total.

Top
 Profile  
 
 
 Post subject: Re: HELP injector change
Posted: Sun Jun 03, 2012 5:13 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

I recon he might of sorted it out in the last 6 years.................
Epic threadmine!

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: HELP injector change
Posted: Sun Jun 03, 2012 5:48 pm 
Oompa Loompa
Offline
User avatar

Age: 56

Posts: 26

Joined: 11th Jun 2005

Gallery: 11 images

Ride: SVT Cobra S/C 4.6 4V - 440bhp

Location: MEL & SFBA
VIC, Australia

EVL098 wrote:
I recon he might of sorted it out in the last 6 years.................
Epic threadmine!


You reckon..!!! Captain Obvious..!!!

Be careful there's some really sharp tools in here.....

Others probably have not worked it out..!!!

Didn't see any definitive responses over 6 years..!!

A million unemployed & you wanna be a comedian...

I'm offering helpful information....isn't that the spirit of the forum?

 

_________________

____________________________________________
1972 XA GT351 [RPO83] - (1 of 259)

1997 EL GT - (1/240 AU Production Models)
2000 SVT Cobra R - LHD (1/300)
2003 SVT Cobra [10th Anniversary] - LHD (1/242) 330rwkW
2014 Shelby GT500 - LHD 495rwkW______________

Last edited by legt on Sun Jun 03, 2012 6:19 pm, edited 3 times in total.

Top
 Profile  
 
 
 Post subject: Re: HELP injector change
Posted: Sun Jun 03, 2012 5:52 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

Sand in Vagina?

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: HELP injector change
Posted: Sun Jun 03, 2012 5:57 pm 
Oompa Loompa
Offline
User avatar

Age: 56

Posts: 26

Joined: 11th Jun 2005

Gallery: 11 images

Ride: SVT Cobra S/C 4.6 4V - 440bhp

Location: MEL & SFBA
VIC, Australia

EVL098 wrote:
Sand in Vagina?


You really should see someone about that...maybe use a hard bristled scrubbing brush & grout cleaner & take a shower afterwards.

PS> Not sure on the specific gravity of 'Sand in Vagina'..............but your injector may require reconditioning by the sound of it...!!! You should order a much bigger one whilst you're at it, know one's told you yet but you could likely use it.

PPS> I 'recon' you might want too spend all that idle time taking extra spelling classes in the evenings.

uniacidz wrote:
EVL098 wrote:
I recon he might of sorted it out in the last 6 years.................
Epic threadmine!


LOL classic thread mine


Double Classic indeed................
Watch out.!!
it's the 'tag team' from the Muppet Show.!!
I'm wrestling wits with Kermit the Frog & Miss Piggy....or is it Fozzie Bear..??

Keep standing behind the clowns waiting for your big moment.........
And watch out for the elephant droppings........

 

_________________

____________________________________________
1972 XA GT351 [RPO83] - (1 of 259)

1997 EL GT - (1/240 AU Production Models)
2000 SVT Cobra R - LHD (1/300)
2003 SVT Cobra [10th Anniversary] - LHD (1/242) 330rwkW
2014 Shelby GT500 - LHD 495rwkW______________

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 20 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: Google Adsense [Bot] and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri May 03, 2024 9:33 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names