|
| Tezza393 |
|
|||
|
Hey all, i am new to all this forum thing
 ,
i am here to ask about extractors, i have a 1996 NL fairlane V8 stock as a rock and am wondering if anyone could recomend a good set, and a decent set of high flow cat's i am looking at 3" from cat's back any other general things to do to increase power would be appreciated thanx Terence
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| EDXR8 |
|
|||
|
Pacemaker PH4000 extractors are very good IMO. Magnaflow high flow cas are very good too, but probably a touch more expensive compared with other brands out there. And as for the exhaust, on a stock to mild engine you will actually see better performance with a 2.5" system, a 3" in comparison will loose a bit of low end power (which is important on the road) and is more suited to highly modified engines.
|
|||
| Top | |
|||
| Bsjenko |
|
|||
|
welcome fellow V8 fairlane!!!
Yeah the pacemaker ph4000 are the go for headers. I have 2.5" dual exhaust, cat back. I am lead to believe that the standard cats are actually fairly good for flow, and have been advised not to change them.
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| memnoch |
|
||
|
yeah go the pacemaker PH4000 like mine they are good, i got those 3" stainless high flow cats cost me $250 each, and i got 2 1/2 mand bend pipe from cats, i'm happy with it
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| Pat5L |
|
|||
|
Go the Pacemaker PH4000 for sure, I have been chasing some exhaust work and was told that a 2.5" dual system is the best option...
Quoted by Rob Bliss Exhausts (Brisbane) Pacemakers, 2 x 2.5" hi-flow cats, 2 x 2.5" S bent systems = $2000 Or Pacemakers, 3" hi-flow cat, 3" mandrel bent system = $1800 You may want to look at these items - Air intake & filter Cam You can go all out if you can afford it and stroke/blow 
Hope this helps a bit Pat |
|||
| Top | |
|||
| Tezza393 |
|
|||
|
hey, as far as i know the twin system under the fairlane wont fit, so thats why i was looking at 3" single back,
and for stroker/blown this is not a cheap option but is on the burner, and have also read that the 347 strokers arent strong, i was thinking more of one or the other, more towards the 347. And..... i was also looking at replacing the diff for an LSD 3.45, can i just change the center or do i have to go the whole diff, I found one at a wreckers for $550 for an EL XR (i assume it fits) all help apreciated thanx
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| fairmont1998 |
|
|||
|
Twin system does fit, just when they go over the diff both pipes have to exit on the drivers side. Its doable but a lot of exhaust places can't be stuffed doing it. I've seen pictures recently of a twin 3" system on an blown EL that went over the diff. Its a work of art.
Twins on EFI Windsors sound nice too 
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 36 guests |
