|
| 5150 |
|
||
|
Guys,
Which is worh more 'real world' kws to me .... a pod filter on the end of the MAF or the standard air intake box with a K&N? Cheers
_________________ Chasing 162mph on the Salt! 4.2L. Both race cars now sold! |
||
| Top | |
||
| Bassfreak55 |
|
||
|
Standard box with a good panel filter like BMC or K&N IMO.
Also, the panel filters have a bigger surface area, so im guessing that helps out also. |
||
| Top | |
||
| Thomas |
|
|||
|
It's all about getting your cold air. The easiest to do is the K&N panel filter and a AU XR scoop.
Then their is the pod, the pod can give you better gains if done properly and gives you s**t gains if done in-correctly. You will have to construct a housing for your pod so that hot air doesn't get to it. Cold air is better  Id say it isn't worth the trouble as the panel set up will be an improvement and will only take you 15 minutes, oppesed to hours for a proper pod set-up.
Panel filter all the way 
_________________ 237.9 KW ATW
|
|||
| Top | |
|||
| Daniel |
|
|||
|
{USERNAME} wrote: It's all about getting your cold air. The easiest to do is the K&N panel filter and a AU XR scoop.
Then their is the pod, the pod can give you better gains if done properly and gives you s**t gains if done in-correctly. You will have to construct a housing for your pod so that hot air doesn't get to it. Cold air is better Id say it isn't worth the trouble as the panel set up will be an improvement and will only take you 15 minutes, oppesed to hours for a proper pod set-up. Panel filter all the way LOL, i rekon i could remove air box, swap panel and refit airbox in under one min man, where u get 15min from lol! However hes right, go the panel filter. 
_________________ BF Typhoon, Dejavu - 6sp Auto, Leather, Sunroof, 19"s, Electric Pedals, Tint, FPV Sports Wheel, FPV Mats. |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
Sound advice.
I'd only go for a pod if there was something in the way of the airbox. Like an air pump or something
Panel filter will be fine. Easy to do, easy to explain to the cops. Spend your hard-earned bikkies on some underdrive pulleys or something. Maybe think outside the square and find some more ways of getting cold air onto that airbox?
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| 5150 |
|
||
|
Guys,
Thanks, that is what I though from previous experience and research, However, I thought I would put it open to the forum first incase there was something I had missed. I will order a K&N or a BMC today. Cheers
_________________ Chasing 162mph on the Salt! 4.2L. Both race cars now sold! |
||
| Top | |
||
| One Drone |
|
|||
|
Pod if you can obtain the BA Pod Setup however.. Not worth the money however at the moment - you don't need that much air.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| Thomas |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: It's all about getting your cold air. The easiest to do is the K&N panel filter and a AU XR scoop. Then their is the pod, the pod can give you better gains if done properly and gives you s**t gains if done in-correctly. You will have to construct a housing for your pod so that hot air doesn't get to it. Cold air is better Id say it isn't worth the trouble as the panel set up will be an improvement and will only take you 15 minutes, oppesed to hours for a proper pod set-up. Panel filter all the way LOL, i rekon i could remove air box, swap panel and refit airbox in under one min man, where u get 15min from lol! However hes right, go the panel filter. It'l take roughly 15 minutes to fit the XR scoop; match mouth and drill hole and then fit the panel filter.
_________________ 237.9 KW ATW
|
|||
| Top | |
|||
| mugen |
|
||
|
panel filters are all you need
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: It's all about getting your cold air. The easiest to do is the K&N panel filter and a AU XR scoop. Then their is the pod, the pod can give you better gains if done properly and gives you s**t gains if done in-correctly. You will have to construct a housing for your pod so that hot air doesn't get to it. Cold air is better Id say it isn't worth the trouble as the panel set up will be an improvement and will only take you 15 minutes, oppesed to hours for a proper pod set-up. Panel filter all the way LOL, i rekon i could remove air box, swap panel and refit airbox in under one min man, where u get 15min from lol! However hes right, go the panel filter. It'l take roughly 15 minutes to fit the XR scoop; match mouth and drill hole and then fit the panel filter. |
||
| Top | |
||
| Thomas |
|
|||
|
Au XR scoop is a vast improvement over the standard scoop
"Everyone to their own-selves "
_________________ 237.9 KW ATW
|
|||
| Top | |
|||
| neil101 |
|
||
|
I've found BMC's to be better made and easier to clean last few K&N's I've sold have been poorly made.
_________________ HSV I JUST BEAT ONE !
|
||
| Top | |
||
| Bassfreak55 |
|
||
|
{USERNAME} wrote: I've found BMC's to be better made and easier to clean last few K&N's I've sold have been poorly made.
Ive heard similar things aswell... Thats why i bought myself a BMC panel filter
|
||
| Top | |
||
| 5150 |
|
||
|
Who is a Sydney stockist of the BMC stuff?
Or is there a business who has a good mail order price? Cheers
_________________ Chasing 162mph on the Salt! 4.2L. Both race cars now sold! |
||
| Top | |
||
| AXR88U |
|
|||
|
{USERNAME} wrote: Also, the panel filters have a bigger surface area, so im guessing that helps out also.
I dont think so ! Its a long way around a pod filter
_________________ ________________________________________
|
|||
| Top | |
|||
| XRFan101 |
|
|||
|
I would personally go with the airbox + K&N filter + the AU XR snorkle. Unless you can make your own top noth pod setup then do it,but i wouldnt go there personally as it ends up costing more that way.
However after hearing my mates EB XR6 pod filter im now considering getting one lol! 
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
Maybe a small-block tractor puller! or a Lotus 7 Clubman is next! or a 351-stroker powered EB ... ?
-BF MKII XR6 Turbo in EGO-