Hey guys i just obtained a 5.0Ltr from my brothers NF fairlane wreck.
It is being transplanted into my EA pictured.

I have got most things sussed out although i am a bit unsure as to what ecu to use, due to smartlock etc. And also as to which was is best to wire it up?

Am i able to just pull the entire wiring loom from the NF Fairlane and use that or would it be best to use one from and EB-ED?

Any thoughts of the best way to go about it i would be most appreciative.

Cheers Wez

 

 

Attachments:

l_8f717a4e9e4787458f1d72cbca31d88d.jpeg [ 51.35 KiB | Viewed 244 times ]

the way i see it you have a few options. you can use the computer you have with all the smartlock gear. you can buy one of those smartlock bypass modules. there is also a document here about how to get around smartlock. might be worth a read.

so if i was to rip out the dash cluster wiring loom and computer. i could replace in my EA and just bypass the smartlock?>

mate what i did is i put every thing from a dc ltd into a eb because if you use everything you dont muck around with looms all you do is clip 'em on