
			
  | 
	
| gunit18 | 
				
  | 
		||
				
  | 
			
					 
							
							Hey guys, after a bigger maf/24's now. wondering if this AU MAF will fit replacing the EL stocko? he says its 70mm too, that correct? cheers
 
				http://cgi.ebay.com.au/FORD-XR8-AU2-70M ... dZViewItem  | 
		||
| Top |   | 
			||
| gunit18 | 
				
  | 
		||
				
  | 
			
					 
							
							and if these bosch injectors will fit? thanks heaps...
 
				http://cgi.ebay.com.au/Injectors-8-Bosc ... dZViewItem  | 
		||
| Top |   | 
			||
| XR9UTE | 
				
  | 
		||
				
  | 
			
					 
							
							You can get away with using that MAF by fitting the hotwire from your original MAF. 
 
				The injectors however are not 24lb/hr. Those 775's are only rated at 196cc/min which is 20.57Lb/hr and you have to run 47.9PSI fuel pressure to get that flow!?! If you run them at 39psi they are only 18.57lb/hr capable which means they are actually smaller than your stock 19's. You need part# 0 280 150 947 which are rated at 255cc/min which is 24Lb/hr @ the stock fuel pressure of 39psi. Cheers, Pete.  | 
		||
| Top |   | 
			||
| Vic | 
				
  | 
		|||
				
  | 
			
					 {USERNAME} wrote:  You need part# 0 280 150 947 which are rated at 255cc/min which is 24Lb/hr @ the stock fuel pressure of 39psi. 
Cheers, Pete. Yep, the little buggers look like this:  						
						
						
								
							
 _________________ 5.6L of carbon footprint.  | 
		|||
| Top |   | 
			|||
| XR9UTE | 
				
  | 
		||
				
  | 
			
					 
							
							Yeah Vic,
 
				I don't how many cars Ive had to fix that had the friggin Smegma injectors because they thought they were 24's!? Pete.  | 
		||
| Top |   | 
			||
| One Drone | 
				
  | 
		|||
				
  | 
			
					 
							
							Obviously doesn't pay to be cheap.						
						
						
								
							 
				
 _________________ There are 10 types of people in this world.  | 
		|||
| Top |   | 
			|||
| Vic | 
				
  | 
		|||
				
  | 
			
					 {USERNAME} wrote: Yeah Vic, 
I don't how many cars Ive had to fix that had the friggin Smegma injectors because they thought they were 24's!? Pete. Lol Pete. I asked many questions when starting my little project and one of the first things I learnt was that the FMS injectors would flow fine at stock fuel pressure as compared to some aftermarket injectors. So some applications work just fine with genuine Ford parts! 
 _________________ 5.6L of carbon footprint.  | 
		|||
| Top |   | 
			|||
| XR9UTE | 
				
  | 
		||
				
  | 
			
					 
							
							Well yeah and it's not even so much that but....check the damn part numbers! I even had one colour blind idiot try to tell me that yellow 19's were green!?!...he thought they were 42's!...I said "take your rose coloured glasses off!"  
				Pete.  | 
		||
| Top |   | 
			||
| Who is online | 
|---|
Users browsing this forum: No registered users and 27 guests  |