|
| Papa Smurf |
|
||
|
low_ryda wrote: hi papa smurf, what a sensational wealth of knowledge you bring that couldn't be matched by my local ford dealer... lol. can you tell me if it's possible to buy the parts to make my AUIIxr6 into a '1 tonner' ? i'm under the impression it's a different brake master cylinder with an additional slave cylinder with an actuator arm... Master Cylinder AU2 2140 B $350.00 Proportioning Valve AUC 2B091 A $512.00 Brake Pipe AUC 2L463 A $11.90 Retainer for Proportioning Valve Bracket EHC 5602 A $13.50 The BA/BF setup is different to AU 1 Tonne. |
||
| Top | |
||
| SWC |
|
||
|
Hi George, can you get me price and availability on the rubber grommet for the PCV valve which fits into the rocker cover. Assuming AU/EF/EL are the same, if not AU please.
|
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Mr Papa Smurf.
I have an AU2 75th futura. I'd like to know if the factory in-dash 6 cd changer head unit is till available and how much ford to sting me for it. |
||
| Top | |
||
| Papa Smurf |
|
||
|
SWC wrote: Hi George, can you get me price and availability on the rubber grommet for the PCV valve which fits into the rocker cover. Assuming AU/EF/EL are the same, if not AU please. Yes they are available and the AU one is different to the earlier one. part number is FAZ 6A892 BA retail price $23.40. |
||
| Top | |
||
| Papa Smurf |
|
||
|
tickford_6 wrote: Mr Papa Smurf. I have an AU2 75th futura. I'd like to know if the factory in-dash 6 cd changer head unit is till available and how much ford to sting me for it. These units are obsolete but I have one for $200.00 if interested, it is a 6cd changer. |
||
| Top | |
||
| Mont5.0 |
|
|||
|
Hi George. me again. The dog leg mould for BA Fairlane?
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Mont5.0 wrote: Hi George. me again. The dog leg mould for BA Fairlane? The moulds are different from 01/03/2005. BF F291A34 AP O/S BF F291A35 AP N/S $127.00 each to the 28/02/2005 BF2 F291A34 A O/S BF F291A35 A N/S $53.83 each from the 01/03/2005 |
||
| Top | |
||
| Mont5.0 |
|
|||
|
its the one "without" the chrome strip in it. and are those prices just for the dog leg mould or the whole mould set?
cheers |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Mont5.0 wrote: its the one "without" the chrome strip in it. and are those prices just for the dog leg mould or the whole mould set? cheers Moulds only. |
||
| Top | |
||
| Benny D |
|
|||
|
psps smurf help needed asap.
im goin to be puttin a 3.73 xr8 lsd into my xt falcon but they have a different tailshaft connecting piece on the front of the diff. if i get a tailshaft to suit will it suit the rest of my car as in the length and will it fit my 4spd auto gearbox? if not can the front end of the tailshaft be swapped with mine ezily?
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| knowsfords |
|
||
|
I don't suppose the ef/el seat support/handbrake mount panel is still available?
|
||
| Top | |
||
| frd906n |
|
||
|
You wouldnt happen to no if ford still can get the led strips in the wing on a au, Not the triangle light the rectangle one
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| low_ryda |
|
|||
|
thanks papa smurf, thats not nearly as horrifying as i expected lol now just have to work out if i can register an xr as a tonner
 cheers.much appreciated.
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| dazza027 |
|
||
|
Thanks for clearing that EA spoiler question Papa. Much Appreciated.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
knowsfords wrote: I don't suppose the ef/el seat support/handbrake mount panel is still available? Sorry matey, NO. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 1 guest |
