|
| Papa Smurf |
|
||
|
frd906n wrote: You wouldn't happen to no if ford still can get the led strips in the wing on a AU, Not the triangle light the rectangle one You can still buy the lamp for the spoiler, it is $260.00 part number AU2 13A582 A |
||
| Top | |
||
| Papa Smurf |
|
||
|
Benny D wrote: psps smurf help needed asap. i'm going to be putting a 3.73 xr8 lsd into my xt falcon but they have a different tailshaft connecting piece on the front of the diff. if i get a tailshaft to suit will it suit the rest of my car as in the length and will it fit my 4spd auto gearbox? if not can the front end of the tailshaft be swapped with mine easily? The Flange that fits on the Pinion is the same on the 3.73 as Turbo BA's and as far as I know you should be able to use either a V8 shaft or the Turbo one? same body. These split tailshafts are serviced ONLY as a complete unit. |
||
| Top | |
||
| Benny D |
|
|||
|
srry mate ment the yoke piece on the froent that goes into the box.
but that idea has been squashd anyway. thanx for info.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| frd906n |
|
||
|
Papa Smurf wrote: frd906n wrote: You wouldn't happen to no if ford still can get the led strips in the wing on a AU, Not the triangle light the rectangle one You can still buy the lamp for the spoiler, it is $260.00 part number AU2 13A582 A holly crap olly, i think ill stick with the one the body kit spoiler teck can get, thanks anyways papa smurf
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| SLO247 |
|
||
|
Papa Smurf what will I be stung for a pair of engine mounts for an AU I6?
Also are the front and rear bumper mounting brackets still available for an NF Fairlane? Last edited by SLO247 on Tue Oct 19, 2010 12:24 pm, edited 1 time in total. |
||
| Top | |
||
| Albino |
|
||
|
Hey papa, any idea what this item is called?
94DA 14A664 AA cheers mate...
_________________ Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure. |
||
| Top | |
||
| 89S-PACK |
|
|||
|
a long shot..
was wondering with the au alternators.. are the rear mounts different between AU series 1 (motorcraft) and series 2 3 ba (mitsubishi) the one im speaking of is the one that bolts to the block.. just nutting out what i need to get to to be able to fit the more common alt (mitsubishi) before the motorcraft dies.. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
SLO247 wrote: Papa Smurf what will I be stung for a pair of engine mounts for an AU I6? Also are the front and rear bumper mounting brackets still available for an NF Fairlane? The retail price for AU 6cyl engine mounts are $220.50 each, part number EL 6038 A. Front Bar Brackets, L/H EL 17A979 A $93.70, R/H EL 17A978 A $75.50 Rear Bar Brackets, L/H EF 17A932 C, R/H EF 17A929 C both are $78.00 each |
||
| Top | |
||
| Papa Smurf |
|
||
|
Albino wrote: Hey papa, any idea what this item is called? 94DA 14A664 AA cheers mate... It's an Air Bag clock spring. |
||
| Top | |
||
| Papa Smurf |
|
||
|
89S-PACK wrote: a long shot.. was wondering with the AU alternators.. are the rear mounts different between AU series 1 (motorcraft) and series 2 3 BA (mitsubishi) the one i'm speaking of is the one that bolts to the block.. just nutting out what i need to get to to be able to fit the more common alt (mitsubishi) before the motorcraft dies.. The BA Alternator is used for ALL AUs and so the brackets will fit either alternator, all you have to do is wiring changes for the NEW alternator.  You can buy the little rework kit from a Ford Dealer part number AU 10K300 AMC is costs $24.70. |
||
| Top | |
||
| phatba |
|
||
|
hi george
bg14c575c what does that come up as and whats the price? been told that its the main wiring loom for an fg optional ipod kit. although the guy at my local ford spares says it doesnt exist as i need to buy a whole kit for close to $400 cheers mate |
||
| Top | |
||
| Papa Smurf |
|
||
|
phatba wrote: hi George bg14c575c what does that come up as and whats the price? been told that its the main wiring loom for an FG optional Ipod kit. although the guy at my local ford spares says it doesn't exist as i need to buy a whole kit for close to $400 cheers mate Well, BG 14C575 C is the main wiring harness for an FG Audio Link and is available from Ford price $53.20.
|
||
| Top | |
||
| phatba |
|
||
|
yay win for me! optional ipod connection on the cheap. cheers mate.
|
||
| Top | |
||
| Matt_jew |
|
||
|
Here is a curly one George.
Is there a rear bowl sump available for a 5.0 F150 listed? Looking for a new one.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| knowsfords |
|
||
|
Papa Smurf wrote: knowsfords wrote: I don't suppose the ef/el seat support/handbrake mount panel is still available? Sorry matey, NO. Dang. *puts a spot weld bit into his drill and heads to the wreckers* EDIT: Also, are the Modular V8 to Ion 4 Speed bellhousings available? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 6 guests |
