|
| phatba |
|
||
|
hi george, have bought all the bits for an fg fpv front end top grill, but theres one bit i cant suss out how it goes on or what it does. any chance of an exploded detail drawing of the parts and where they go?
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Hey George, Probably a long shot but would you know if the 351 water pump to thermostat housing hose is available, as well as the water pump to heater line hose. The 5.0 ones are too short. This is for a late model 351.
If not then looks like it might be a trip to rare spares to see what they have Cheers Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
phatba wrote: hi george, have bought all the bits for an fg fpv front end top grill, but theres one bit i cant suss out how it goes on or what it does. any chance of an exploded detail drawing of the parts and where they go? This is the best I can find for you. Attachment: FrtBar.JPG Attachment: Grille.JPG
|
||
| Top | |
||
| Papa Smurf |
|
||
|
TerroristGHIA wrote: Hey George, Probably a long shot but would you know if the 351 water pump to thermostat housing hose is available, as well as the water pump to heater line hose. The 5.0 ones are too short. This is for a late model 351. If not then looks like it might be a trip to rare spares to see what they have Cheers Brett The 351 F series injected hose is $38.50 retail part number E6TZ 8597 B. The heater hose isn't serviced anymore in Aus but Ford recommends the use of just straight 5/8" hose. |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
No worries George. Order me one in and i will be in on thursday to pick it up.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Hey George,
Need confirmation on a gearbox. The build plate on the side states 91DA-7003-EA. Is this an EB onwards 6Cyl T5. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
TerroristGHIA wrote: Hey George, Need confirmation on a gearbox. The build plate on the side states 91DA-7003-EA. Is this an EB onwards 6Cyl T5. Brett 91DA/EA is from an XR6 from 01/02/1992-01/11/1993 |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Thanks mate much appreciated.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
ashcook wrote: To your knowledge George, do the Territory's have an issue with windscreen washer bottle pressure? Mine have always been very weak and it is quite annoying. It only just dribbles above the wipers they are in the low position. Rare for Territory's to have this issue, was common among earlier model Falcons. They DO have a non-return valve in the washer hose system, part number XE 17615 A $15.40 retail. The reservoir is the same as the BA's and there was an issue with the Pumps, the Territory has the same type pump fitted, they are BAF2 17K624 A $55.00 and the Grommet for it, EF 17K659 A $4.60. |
||
| Top | |
||
| Matt_jew |
|
||
|
Could I please have the price and availability on the blinker/highbeam stork for an EL XR in grey please George? Dons is playing up and it looks like its a job I cant dodge any longer. Also would a grey drivers seatbelt still be available?
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Papa Smurf |
|
||
|
ashcook wrote: Are the pumps the same for the AU's? I have a heap of them. I may have a BA one but will have to see if it is ok. Will give that a crack first. They are the same as AU. |
||
| Top | |
||
| Papa Smurf |
|
||
|
EVL098 wrote: Could I please have the price and availability on the blinker/highbeam stork for an EL XR in grey please George? Dons is playing up and it looks like its a job I cant dodge any longer. Also would a grey drivers seatbelt still be available? The combo switch is available, $284.00 retail, unfortunately the Seat Belt is obsolete. |
||
| Top | |
||
| 80crm |
|
|||
|
How much for a set of injectors and harmonic balancer to suit AU series 3 XR8?
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
80crm wrote: How much for a set of injectors and harmonic balancer to suit AU series 3 XR8? There is just one Injector for series II/III, part number XL2Z 9F593 CA $242.00 each, blue ident, series I XS2Z 9F593 BA $71.90 each ident Orange. harmonic Balance F67Z 6312 AA $501.70. You can get these things on Ebay for MUCH less and at the moment our Dollar is equal to the American one so a good time to buy from OS 
|
||
| Top | |
||
| 80crm |
|
|||
|
No worries
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
