|
| Papa Smurf |
|
||
|
killer_ef wrote: i want to put xenon headlight bulbs in my car, but i don't know what type it is can i please get the correct part numbers please so i can match it cheers All I can give you is the Genuine Ford part number, SX 13466 A H4. |
||
| Top | |
||
| bladez_01 |
|
|||
|
Hi Papa Smurf
Am looking for a price on a water pump kit for Ef XR8 5.0lt. I think the part # is: GWF 15010 93A Cheers Nathan |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
hans hartman wrote: hi,can i get the part number and cost of a 302w harmonic balancer,is there a oem part number? thanks George From Ford OZ they are LONG gone, the part number was D2AZ 6316 B. I found this info, might help http://www.dormanproducts.com/mobile/p- ... 4-277.aspx http://www.fordracingparts.com/parts/pa ... ield=10732 |
||
| Top | |
||
| Papa Smurf |
|
||
|
bladez_01 wrote: Hi Papa Smurf Am looking for a price on a water pump kit for EF XR8 5.0lt. I think the part # is: GWF 15010 93A Cheers, Nathan Sorry mate, no longer available. |
||
| Top | |
||
| the sam |
|
||
|
Papa. Do you know whether the nf windsor v8 water pump pulleys are available separately or are they pressed on and reused?
Cheers Sam
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| Papa Smurf |
|
||
|
the sam wrote: Papa. Do you know whether the NF Windsor v8 water pump pulleys are available separately or are they pressed on and reused? Cheers Sam They bolt on. 
|
||
| Top | |
||
| the sam |
|
||
|
Excellent!
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| hans hartman |
|
||
|
Papa Smurf wrote: hans hartman wrote: hi,can i get the part number and cost of a 302w harmonic balancer,is there a oem part number? thanks George From Ford OZ they are LONG gone, the part number was D2AZ 6316 B. I found this info, might help http://www.dormanproducts.com/mobile/p- ... 4-277.aspx http://www.fordracingparts.com/parts/pa ... ield=10732 MY BAD  ef 302w efi balancer
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| TROYMAN |
|
||
|
EVL098 wrote: alfy wrote: EVL098 wrote: Hi George We had some fun getting a new serpentine belt for the EF wagon today. Nothing seemed to want to fit. The original Motorcraft one on it has the part number 94DA-8620-AC What would it originally come from so we know what to get next time? Cheers Matt a 6PK2350 belt should do the job. Dayco part number is 20-5355, Motorcraft part number AJK6945. (sorry about stealing your thread a tiny little bit george  )Thats the problem Alfy it didnt. With the tensioner at full compression the 6PK2350 would not fit. It missed out by about 15mm by the looks of it. AT SWC's suggestion we tried an AU aftermarket belt incase an AU compressor had been fitted. That belt went on but the tension is now about half way through its travel. Thats why I am hoping to find out what the original belt that come off it was so I can get one of them and change it over. strangely enough i just had the same problem with a au serpentine belt. removed the old motorcraft one and we were given a 6pk2380, which is the correct replacement.. but unfortunatly this belt is 15mm too short..  its that short there is no possable way it will go on without breaking something..so we took it back.. and the guy at peps has a dayco belt measurer and the replacement 6pk2380 actually measures out to be 2370 in length... so at the moment its looking like the aftermarket manufacturing specs are off?? waiting for them to order in a different brand belt to see if its different.. |
||
| Top | |
||
| Papa Smurf |
|
||
|
hans hartman wrote: MY BAD ef 302w efi balancerE4TZ 6316 A $290.00 retail. |
||
| Top | |
||
| knowsfords |
|
||
|
Hey Papa I'm after a price for set of upper and lower engine mounts for a BF XR8... also a part no :p
|
||
| Top | |
||
| Papa Smurf |
|
||
|
knowsfords wrote: Hey Papa I'm after a price for set of upper and lower engine mounts for a BF XR8... also a part no :p Ok, you have the engine mount itself, part number BA 6B032 B $165.30 each or, the mount with the upper and lower brackets R/H BAT 6C010 A $284.00 and the L/H BAT 6C060 A $266.50. |
||
| Top | |
||
| Benny D |
|
|||
|
hey papa smurf. just after a bit of info.
can i interchange a ba xr8 4spd auto gearbox into my ba xtv8? or is there anything majorly different. i rang my local ford place and they said its a different part number between the xr8 and a xt v8. also is there any different gearing between the two? and if so wich way? will my gears be shorter with the xr8 one or taller? sorry about all the Qs. lol. thanx.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
Benny D wrote: hey papa smurf. just after a bit of info. can i interchange a ba xr8 4spd auto gearbox into my ba xtv8? or is there anything majorly different. i rang my local ford place and they said its a different part number between the xr8 and a xt v8. also is there any different gearing between the two? and if so wich way? will my gears be shorter with the xr8 one or taller? sorry about all the Qs. lol. thanx. The only difference I can see is that the Valve body is the ONLY difference in both transmissions. The Power Train module is different but I think it is for the different change rates for the trans. Truly I could not see why you couldn't make the change. |
||
| Top | |
||
| Papa Smurf |
|
||
|
There is a handle insert available, I have circled it in red on the pic, is $46.00 retail.
Attachment: ARM rest.JPG
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 2 guests |
