|
| BorgWarner |
|
||
|
What would the price and part number be for the auto tensioner/pulley for a EB2 5.0?
Ford NZ want nearly NZ$500 for it 
|
||
| Top | |
||
| Papa Smurf |
|
||
|
BorgWarner wrote: What would the price and part number be for the auto tensioner/pulley for a EB2 5.0? Ford NZ want nearly NZ$500 for it Pardon me if I sound silly but, you ARE referring to the Pulley for the Drive Belt? There are 2 pulleys, a Top pulley closer to the water pump for $150.00 EC 6B209A and the Lower one is $196.00 EC 8B604A. I hope that is what you are asking for? Attachment: Pulley.JPG
|
||
| Top | |
||
| svo_matt |
|
|||
|
hello papa smurf im after a set of brushes for an eb v8 alternator could you plz give me a price and part number and to ford still stock them, thanks
_________________ ..My fake plant died because I forgot to pretend to water it.. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
svo_matt wrote: hello papa smurf im after a set of brushes for an eb v8 alternator could you plz give me a price and part number and to ford still stock them, thanks Alternator brushes on the V8 come only with Regulator only part number F1DZ 10C359A $394.00 and STILL available  I would say that a Reco alternator would be far cheaper 
|
||
| Top | |
||
| Matt_jew |
|
||
|
Hey George. Can You help me out with a price and a part number for a speedo drive gear to suit a 3.45 diff for a NF Fairlane?
Cheers Matt
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Papa Smurf |
|
||
|
EVL098 wrote: Hey George. Can You help me out with a price and a part number for a speedo drive gear to suit a 3.45 diff for a NF Fairlane? Cheers Matt No worries, XE 17271E 22 teeth, grey in colour $20.30 for 15" wheels and, XE 17271F 23 teeth, Black $13.00 for 16" wheels.
|
||
| Top | |
||
| .OZZY. |
|
|||
|
hey papa smurf am i able to get the blue lights that are behind the BA-BF xr6 air con and CD player that are used to illuminate the buttons
_________________
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
.OZZY. wrote: hey papa smurf am i able to get the blue lights that are behind the BA-BF xr6 air con and CD player that are used to illuminate the buttons Ozzy, I am gonna have to disappoint you, it appears that Ford are not interested in servicing ANY parts for the centre unit. When there are problems with these units under warranty we just put a replacement unit in and the OLD ones are sent to Sumitomo for repair.
|
||
| Top | |
||
| SLO247 |
|
||
|
Hi again Papa Smurf.
I'd just like the part numbers and price for the two plugs that fill the bottom screw holes for the rear numberplate on my AU XR6-We have slimline plates and there are plugs where the big plates would normally screw in at the bottom. Thanks Papa Smurf. |
||
| Top | |
||
| foggy |
|
||
|
Hi Papa Smurf,
Could you tell me if the leaf spring slipper pads are available for an AU 1 tonner? Are they the same as used in the xh utes and e series wagons? Thanks in advanse for your help Foggy |
||
| Top | |
||
| Papa Smurf |
|
||
|
SLO247 wrote: Hi again Papa Smurf. I'd just like the part numbers and price for the two plugs that fill the bottom screw holes for the rear numberplate on my AU XR6-We have slimline plates and there are plugs where the big plates would normally screw in at the bottom. Thanks Papa Smurf. There are 4 grommets in the boot-lid for screwing the plates on, they are an oval type shape, unfortunately Ford has not come up with something to properly blank off the holes in the boot-lid but the standard plugs are V 850266S $3.60 each, these are also the same for BA/BF's. |
||
| Top | |
||
| Papa Smurf |
|
||
|
foggy wrote: Hi Papa Smurf, Could you tell me if the leaf spring slipper pads are available for an AU 1 tonner? Are they the same as used in the xh utes and e series wagons? Thanks in advance for your help Foggy The Spring Insulator Pads are the same from about XP falcons on, Sedan, Ute and Wagon. The part number C4GA 5732A and they cost $14.10 each. There IS however a SPECIAL one listed for the AU 1 Tonner part number AUC3 5536A and price is $5.10 each. I have never seen these 1 Tonner ones so I can't comment. I hope it is the pads that sit between the spring and Diff you were asking about?
|
||
| Top | |
||
| foggy |
|
||
|
Thanks for that but I was actually looking for the pads that go between the leafs and to stop metal on metal rubbing when you load up.
Foggy |
||
| Top | |
||
| Papa Smurf |
|
||
|
Sorry about the misunderstanding, the spacers you are referring to are still available, part number COAA 5586B $10.20 each. They are NOT listed for use on AU/BA but they do fit.
|
||
| Top | |
||
| SLO247 |
|
||
|
So the plates are simply screwed into the grommets?
Thanks very much
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 7 guests |
