|
| Papa Smurf |
|
||
|
TimmyA wrote: George... After doing the calcs a 15" tire is way closer a 17 than a 15" tire... As such the grey 22T gear would be the better one to own... Should've worked that out first... Which is the one Lanham's reckon is obsolete? Any lying around anywhere else you can see? Thanks for all that info on the cable... Will suss it out  Cheers, Tim Tim, we have 5 in stock and they are $23.30 each, XE 17271 E EL GT with 17" is listed with 23T. Last edited by Papa Smurf on Thu Mar 31, 2011 3:50 pm, edited 1 time in total. |
||
| Top | |
||
| Papa Smurf |
|
||
|
dc_todd wrote: Papa, can you quote me an unusual one.. Oil pressure sender for 95 Probe, price and avail? Cheers, Dave They are still available, part number is B367 18501 $36.00 and we have 2 of them in stock. |
||
| Top | |
||
| ausedwagon |
|
|||
|
ausedwagon wrote: i also need a new spedo gear. i have the green one now and ive put a 3.45 lsd in so my spedo is bout 10% high. what color do i need to corect it? i have 17's
_________________ 94 White ED Wagon |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
ausedwagon wrote: ausedwagon wrote: i also need a new speedo gear. i have the green one now and ive put a 3.45 lsd in so my speedo is bout 10% high. what color do i need to correct it? I have 17's Well, Tim seems to think he will need 22T gear for the same thing but the EL GT with 17" and had a 23T gear. The 23 is XE 17271 F $13.70 and the 22 is XE 17271 E $23.50 |
||
| Top | |
||
| Papa Smurf |
|
||
|
Ash wrote: Hi George, While we're all on the topic of speedo senders, would there be any chance at all of an XF unit around the neck of the woods anywhere? A mate needs one for his C4. Cheers! An XF with a C4? not a factory item  All XFs use the EA/EB/ED/EF/EL/AU one, I am sure this will fit the C4. If he needs a new gear the C4 ones are still available.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
The XD ones work with a different type of signal I was told, the XD one is still available XD 17B353 A and cost $118.00. The gears cost around the $24.00 mark each.
|
||
| Top | |
||
| Papa Smurf |
|
||
|
Yes they are
|
||
| Top | |
||
| fairlane6970 |
|
|||
|
George
I've had a bloke chasing me for a AU11 Fairlane Ghia blower fan motor controller he's been told they are obsolete due to the manufacturer going belly-up! is this true he gives the part no. as ER19E624A. I am not sure what it is but am thinking its the climate control unit?
_________________
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
fairlane6970 wrote: George I've had a bloke chasing me for a AU11 Fairlane Ghia blower fan motor controller he's been told they are obsolete due to the manufacturer going belly-up! is this true he gives the part no. as ER19E624A. I am not sure what it is but am thinking its the climate control unit? Well, I don't know who told him or where he got that info BUT, the part is still showing as available and with a price tag of $415.00. When I go to work on Monday I will double check for you. |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Papa Smurf wrote: The XD ones work with a different type of signal I was told, the XD one is still available XD 17B353 A and cost $118.00. The gears cost around the $24.00 mark each. That is correct George. I had to use this sender when i went to 3.9 gears to slow the signal down to correct the speedo in the EF. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
Papa Smurf wrote: fairlane6970 wrote: George I've had a bloke chasing me for a AU11 Fairlane Ghia blower fan motor controller he's been told they are obsolete due to the manufacturer going belly-up! is this true he gives the part no. as ER19E624A. I am not sure what it is but am thinking its the climate control unit? Well, I don't know who told him or where he got that info BUT, the part is still showing as available and with a price tag of $415.00. When I go to work on Monday I will double check for you. Thanks George He got my no. through NRMA and is going nutso! so any help will be greatly appreciated.
_________________
|
|||
| Top | |
|||
| Fordsrule174 |
|
||
|
hey george im after a diagram of the NF's synchronizer as i believe it may be causing a cold start problem
_________________ NF Fairlane Ghia, Brand New Leather Interior, Wallnut All Through, 800W RMS JL Audio Sound System, Lowered King Springs And Monroe GT Shocks, Custom BA/GT Air Intake, Holley Highflow, Simmons B45's, Going To Be Supercharged At 9-12psi With Stage 4 Head And Cam With Pacemakers And 3" Exhaust |
||
| Top | |
||
| Papa Smurf |
|
||
|
Fordsrule174 wrote: hey george im after a diagram of the NF's synchronizer as i believe it may be causing a cold start problem Here is the best pic I have. Attachment: 12129.JPG
|
||
| Top | |
||
| Papa Smurf |
|
||
|
fairlane6970 wrote: Thanks George He got my no. through NRMA and is going nutso! so any help will be greatly appreciated. I checked today this number and it HAS been obsoleted. It isn't a very common part to sell these days. There is also a Blend Door motor which is situated on the top of the heater case, maybe that is it? they sure did wear a lot years ago. |
||
| Top | |
||
| SLO247 |
|
||
|
Hi Again Papa Smurf. I recieved that last item fine, thanks.
Can you tell me anything at all about a steering rack bolt recall that was done on the AUs? I have a suspicion my XR6 missed out, it makes the clicking noise from the rack and only has one or two recall labels in the drivers door jam. The Fairmont has many on the other hand. Do you have a number to look for on these labels? Are the bolts still available? Anything you can tell me would be great, thanks.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
