Fordmods Logo

4.11 diff gears 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: 4.11 diff gears
Posted: Sat Nov 22, 2008 4:38 pm 
Parts Gopher
Offline
User avatar

Age: 42

Posts: 66

Joined: 6th Nov 2007

Gallery: 1 images

Location: orange
NSW, Australia

i can get a set of 4.11 diff gears for my eb v8 what results will this make

i kinda think it will be heaps quicka of the mark but rev the guts out of it for 100 is that right?

how hard is it to change could you change it regularly

like 4.11s weekend and normal through the week kinda think sorry bout the dumb question but have no idea

thanx

 

_________________

now playing with a v8 to hahaha

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 4:43 pm 
Technical Contributor
Offline
User avatar

Age: 41

Posts: 4355

Joined: 14th Dec 2005

Gallery: 36 images

Ride: Fairlane

Location: Newy
NSW, Australia

yeah pretty much, it will be quicker off the mark, and will rev a fair bit higher on thje freeway or at high speeds.

I would not like to be replaceing the diffs each weekend. Alot of work, just for that. you would be better off with 3.7's. bit of a compramise between the standard and 4.11

 

_________________

The Lane Lives.... Finally!!!!

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 4:46 pm 
Parts Gopher
Offline

Posts: 61

Joined: 5th Mar 2007

Location: Sydney
NSW, Australia

Incidentally, what is the standard diff ratio?? Is there a spec doc around that shows this for the various models??

 

_________________

E-series

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 4:47 pm 
Parts Gopher
Offline
User avatar

Age: 42

Posts: 66

Joined: 6th Nov 2007

Gallery: 1 images

Location: orange
NSW, Australia

will it be any different because its auto and the price is 100 so i might just try

 

_________________

now playing with a v8 to hahaha

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 4:47 pm 
Technical Contributor
Offline
User avatar

Age: 41

Posts: 4355

Joined: 14th Dec 2005

Gallery: 36 images

Ride: Fairlane

Location: Newy
NSW, Australia

3.27 from memory isnt it.

 

_________________

The Lane Lives.... Finally!!!!

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 4:51 pm 
Parts Gopher
Offline
User avatar

Age: 42

Posts: 66

Joined: 6th Nov 2007

Gallery: 1 images

Location: orange
NSW, Australia

i wouldnt have any idea what mine is

 

_________________

now playing with a v8 to hahaha

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 4:54 pm 
Technical Contributor
Offline
User avatar

Age: 41

Posts: 4355

Joined: 14th Dec 2005

Gallery: 36 images

Ride: Fairlane

Location: Newy
NSW, Australia

get under the car, look at the top rear of the diff and there will be a sticker. it will state the ratio, and to the right it will tell you if it is a LSD or a SS. im pretty sure tahts right. been a while since i had to look.

 

_________________

The Lane Lives.... Finally!!!!

Top
 Profile  
 
 
Posted: Sat Nov 22, 2008 5:58 pm 
Parts Gopher
Offline
User avatar

Age: 42

Posts: 66

Joined: 6th Nov 2007

Gallery: 1 images

Location: orange
NSW, Australia

i just did a search on ebay and found 3.89 gears but says its for lsd / irs? but then says it will fit eb?

hows that work?

 

_________________

now playing with a v8 to hahaha

Top
 Profile  
 
 
Posted: Sun Nov 23, 2008 2:24 am 
Stock as a Rock
Offline

Age: 73

Posts: 190

Joined: 15th Oct 2008

Location: Bumsville
QLD, Australia

if you're asking questions about swapping diff gears then forget it, you need special tools and you'll want someone to check that you've done it right.. but how could you do that?

The EF and EL glis came with 3.08s in the diff, the housing is also slightly smaller and therefore cannot be used with anything other than maybe 3.23s.

You'll have to buy a complete diff and go from there.

Good Luck!
Top
 Profile  
 
 
Posted: Sun Nov 23, 2008 4:10 am 
Parts Gopher
Offline
User avatar

Age: 42

Posts: 66

Joined: 6th Nov 2007

Gallery: 1 images

Location: orange
NSW, Australia

im guessing you through sarcasm in there so ill explain for you

irs wasnt in falcons until the au wich was only added on the high end ghias im pretty sure

ive swapped centres before just not the gears alone

were did ef/el come into it i say at the top of the page i have an eb

ef/el diffs are not a straight swap int ebs either so im guessing your trying to have a go at me

wen i meant change the gears i mean centres have them sitting there,

but no dropping axles and removing centres is not what i want to do every weekend sorry i was generalising

thanx for the advice on the special tool ill go buy it

 

_________________

now playing with a v8 to hahaha

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Apr 30, 2024 2:55 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names