hey guys my brakes felt a little sht today so i poped to bonnet when i got home and found the master cylinder is leaking.

also the booster has a small crack in it that seems to be just patched over by the old owner.

i will properly just get a new booster.

How hard are they to change as i have never done one and is there anything to look out for when doing it.

Thanks

 

 

Attachments:

DSCF0038.JPG [ 287.14 KiB | Viewed 168 times ]

DSCF0039.JPG [ 276.7 KiB | Viewed 184 times ]

my booster in the el just went yesterday,
easy enough to swap over
2 bolts on the inside of the firewall and disconnect the rod to the brake pedal, then 2 bolts for the master, pull the vac hose off, u can then move the master to one side and remove/replace the booster
and put it back together again