|
| Shifteh |
|
||
|
Hello can anyone point me to where the tcm is mounted in ea's and eb's
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Shifteh |
|
||
|
Please someone :S
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Mad2 |
|
|||
|
are you talking about the 'controller' for the gearbox?
|
|||
| Top | |
|||
| Shifteh |
|
||
|
tcm = Transmission control module
_________________ Crank Assembly balanced, HV oil pump, ACL Trimetal bearings, "1 extra oil clearance taking to around 0.0650-0.0700 on mains and big ends, Moly rings,, Xr6 Cam, POD ( Possibly oversize injectors), Block, Head, Timing cover, belt idler, Alternator,painted in ford light blue |
||
| Top | |
||
| Mad2 |
|
|||
|
if i remember correctly [which may not be possible] it's either under under the console or up near the column on early 4speeds, later models had the ecu & tcm combined except V8's. 3 speeds didn't have one & i think someone mentioned that V8's weren't combined till AU?
|
|||
| Top | |
|||
| NLGHIA5.0 |
|
||
|
Under the centre console coin tray, behind the shifter IIRC. If you pull the little plastic coin tray out of the centre console you can see it underneath it.
|
||
| Top | |
||
| Nigel |
|
||
|
TCM for Trans control is above where the clutch pedal would be, held on with 3 10mm nuts.
Speed control (cruise) for EA and EB1 is above accelerator pedal mounted to top of plennum - but for EB2 onwards is behind/underneath power window switch location. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
