|
| Becks |
|
||
|
G'day,
I recently purchased a '96 EF Falcon Futura with an XR kit on it. It had a ELGT snorkel which I didn't know & I when it idles in neutral it's a bit lumpy. I thought the revs needed adjusting but it's idling at 750 so that should be fine. Is there any way I can check if there is an aftermarket Cam on it? Cheers
_________________ Help me go faster |
||
| Top | |
||
| Waggin |
|
|||
|
If its a billet cam, it probably wont have a ford part number anywhere on it.
If its a regrind, it will have a ford partnumber, and probably a make/model/brand stamped into it from the cam shop who did the regrind.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| Mechan1k |
|
||
|
I was wondering the same thing ... I CBF pulling the rocker cover off to check that.
Doesn't bother me ... will be saving some pennies for one of the Wade high-torque cams for the XG ... maybe some head work as well.
_________________ 04 Territory TX AWD - Winter White - optioned up |
||
| Top | |
||
| John_xr6 |
|
|||
|
when they are reground it is usually stamped on the back of the cam what/who done it. so unless you want to pull it out to find out you can only go by what the previous owner has told you.
_________________ 2005 Toyota Hi-Ace aka ICE CUBE |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 32 guests |
