
			
  | 
	
| XCH45R | 
				
  | 
		|||
				
  | 
			
					 
							
							How Do You Change the Indicator bulb On The Front Headlught In The EF Falcon.
 
				Please let me know coz im stuck lol[/b]  | 
		|||
| Top |   | 
			|||
| tomcolahan | 
				
  | 
		|||
				
  | 
			
					 
							
							- open bonnet
 
				- lift the end of the black radiator shroud out - undo the one screw in the top of the indicator housing completely and put it in your pocket - push the indicator housing from the rear towards the front of the car and it will pop out. at this stage it is held in by a ball assembly. the first time you take it out it can be quite stiff so it may take a little while, just keep pushing hard. - once you feel it start to give back off the pushing as the wiring is still connected. - once out, turn the orange globe holder at the back (the wires run into this) and it will pop out. - bulb is normal bayonet fare (push and turn) - installing is just a reversal of this procedure, with attention paid to the following points: * make sure you push the indicator housing in far enough to sit flush again * when you are looking for the screw, its in your pocket. 
 _________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city.  | 
		|||
| Top |   | 
			|||
| snap0964 | 
				
  | 
		|||
				
  | 
			
					 {USERNAME} wrote: - open bonnet 
- lift the end of the black radiator shroud out - undo the one screw in the top of the indicator housing completely and put it in your pocket - push the indicator housing from the rear towards the front of the car and it will pop out. at this stage it is held in by a ball assembly. the first time you take it out it can be quite stiff so it may take a little while, just keep pushing hard. - once you feel it start to give back off the pushing as the wiring is still connected. - once out, turn the orange globe holder at the back (the wires run into this) and it will pop out. - bulb is normal bayonet fare (push and turn) - installing is just a reversal of this procedure, with attention paid to the following points: * make sure you push the indicator housing in far enough to sit flush again * when you are looking for the screw, its in your pocket. :wink: And if you want pictures including an explanation, have a look at the first part of this doco: http://www.fordmods.com/forums/documents.php?doc=58 
 _________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl  | 
		|||
| Top |   | 
			|||
| Who is online | 
|---|
Users browsing this forum: No registered users and 40 guests  |