|
| gotta luv a v8 |
|
|||
|
Howdy, I have noticed lately that a every now and again as I am driving normaly and try to accelerate the motor seems to die in the a*** for a few seconds and then comes to life, I have over the past few months replaced most everything (oxy sensors, plugs, leads,coil packs, injectors,) and cleaned the MAF. I noticed on closer inspection that the harmonic balancer has a bit of a wobble in it and was thinking it may be causing a timing problem. Can anyone tell me if I am on the right track thanks.
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Crank encoder wheel is attached to the hub so if the outer slips it doesn't affect timing.
Change your fuel filter and check your pump flow. |
||
| Top | |
||
| gotta luv a v8 |
|
|||
|
ok will do, thanks
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
If the balancer is R.S ?? It should be replaced.. More so on external balanced engines..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| gotta luv a v8 |
|
|||
|
is there a permissable amount of movement in the balancer or should it run dead straight ?
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| Vic |
|
|||
|
There should never be any movement on your balancer.
_________________ 5.6L of carbon footprint. |
|||
| Top | |
|||
| gotta luv a v8 |
|
|||
|
I have probably worded it wrong , but what I mean by movement is the harmonic balancer with a slight wobble when the motor is running but does not move on the hub itself.
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Even so there should be no runout in any direction. The outer will usually have runout if the rubber between it and the inner hub is failing.
|
||
| Top | |
||
| gotta luv a v8 |
|
|||
|
Thanks , I will replace it , cheers
_________________ Don't force it, use a Bigger hammer |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
