|
| EFFUTURA4.05SP |
|
|||
|
Is there a way of getting rid of the damn squeek coming from my top control arm bushes in my EF?
 Sounds like s**t when I go over speed bumps!If anyone has has success with anything please share. Couple of points to note: They are new (old ones did the same thing). They are greased properly with Nolothane bush grease. I have searched Google (useless) to no avail. Goes away during wet weather. Tends to be on the passanger side more so than the drivers. Cheers 
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Lithium grease.
_________________
|
|||
| Top | |
|||
| Nigel |
|
||
|
Check your Sway Bar D's. They make a very similar noise.
|
||
| Top | |
||
| BEAR80 |
|
|||
Age: 45 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
{USERNAME} wrote: Lithium grease. or rubber grease, not the cheapest but does the job quite well..... |
|||
| Top | |
|||
| EFFUTURA4.05SP |
|
|||
|
I would think the grease supplied would be the best?
Needs to be synthetic I know that much, but is this just something I have to live with as if thats the case I will throw rubber in there!
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| EFFUTURA4.05SP |
|
|||
|
{USERNAME} wrote: Check your Sway Bar D's. They make a very similar noise. I know it is the control arm as I was moving them when they were installed and they were groaning, so I threw some more grease on and it went away...for about a week!!
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| cjh |
|
|||
|
I have had my SuperPro polyurethane bushes for about 8 years ( swapped them from one car to the next, and I bought them new ), and haven't had any noise issues.
My whole car is full of SuperPro bushes.....and no issues.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
I've done the complete front end in the TE, all swapped out the superpro, the original ruber ones were cactus and chewed out, I did upper control arms and sway bars first, then had to proceed to do the rest as I was only gonna be chasing one squeek after another. Full superpro set and not a noise, I've had nolathane before, its been hit and miss with squeeks, lithium grease worked well, and its in a spray can!
_________________
|
|||
| Top | |
|||
| gusbus |
|
||
|
check if the sound is also coming front the top of the shock towers...where the rubber on top of the shock shows in the engine bay
|
||
| Top | |
||
| EFFUTURA4.05SP |
|
|||
|
{USERNAME} wrote: I've done the complete front end in the TE, all swapped out the superpro, the original ruber ones were cactus and chewed out, I did upper control arms and sway bars first, then had to proceed to do the rest as I was only gonna be chasing one squeek after another. Full superpro set and not a noise, I've had nolathane before, its been hit and miss with squeeks, lithium grease worked well, and its in a spray can! I think I have a can of that laying around the shed. Messy though. So the bushes in question are fitted to my camber kit (Nolothane) would Superpro do a re-bush kit for a Nolothane part or would they be as a standard kit? I might have a chat to our supplier at work on Monday and see what can be done. Cheers for all the help
_________________ 1996 EF Futura factory manual |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Superpro is an alternative to Nolathane.
Just put the nozzle off a can of WD 40 on the litium grease, then spray exactly where you want it. No mess.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
