|
| blueblood |
|
|||
|
Hi all, had a clutch and balljoints done today and when they went to start it to put it on the wheel alligner.......Nothing! Scantool showed a smartlock fault and my key fob wont lock/unlock the car. It'll crank but no spark. Now its stuck at Argy Tyres in Newcastle and I live an hour away! Where can I get a smartlock bypass and can I install it or is it a electrition job? I need it back on the road asap as its my daily! Any help greatly appreciated.
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| bry40l |
|
|||
|
tryed bashing the bcm while winding the car over to at least get you home?
_________________ BF XR6 |
|||
| Top | |
|||
| blueblood |
|
|||
|
{USERNAME} wrote: tryed bashing the bcm while winding the car over to at least get you home? Yep, no luck, if I cant get it done tomorrow I'll be trying again tho. Dont think I tried hitting it and cranking at the same time. Just hit it then tried.
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| blueblood |
|
|||
|
Now its started working again as if it never had a problem! Think I'll get a bypass anyway, now its happened I guess it could go at any time again.
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| blueblood |
|
|||
|
{USERNAME} wrote: Dry solder points is usually the cause. If you are tricky with a soldering iron, can do it yourself. If not just as you say, a smartlock bypass. Check the loom, eg take out wiring loom, check connection and make sure nothing like water dripping on it etc Fordmods smartlock bypass post1237443.html?hilit=smartlock#p1237443 Shiftkits Australia http://www.shiftkits.com.au/index.php?m ... ducts_id=4 Cheers for the help, any idea what benifit to me the bypass module has over just bridging the wires?
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
