|
| fairmont 1 |
|
||
|
hi
got a ef fairmont and cruise control doesnt work brake lights work fine, airbag light flashes and stays on unplugged switch at brake master cylinder and touched the 2 pins together and still doesnt work anyone know why |
||
| Top | |
||
| monty EL |
|
||
|
the system requires the pressure switch on master cylinder to switch on & off not just on ,just replace the pressure switch ,i have had to replace 4 on different cars over the years au one is the same
|
||
| Top | |
||
| fairmont 1 |
|
||
|
the socket on the pressure switch was a little oily when unplugging the plug from it
would anyone know why the cc doesnt work and the airbag light flashes and stays on |
||
| Top | |
||
| 96ELGli |
|
||
|
Hi,
May be a fault with the " Clock spring " which is the cable inside the steering column. Look at the error code for the Air-bag, it should help you decide what is wrong. Regards 96ELGli
_________________ Regards 96ELGli |
||
| Top | |
||
| phongus |
|
|||
|
does your horn work?
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
yes horn works good
why wouldnt cruise control work then |
||
| Top | |
||
| monty EL |
|
||
|
I would test the pressure switch for continuity while the pedal is being pressed ,then if the switch is good i would say replace the clock spring as air bag & cruise are connected through the clock spring,ps just because horn still works doesn't mean its not the clock spring (good luck)
|
||
| Top | |
||
| fairmont 1 |
|
||
|
now can hear the cruise control actuator trying to engage but it cant
the cable appears to be on properly at both ends what would that mean |
||
| Top | |
||
| daniel229900 |
|
||
|
i have the exact same issue, but mine started after i pressed the rest/coast button -_-
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 8 guests |
