|
| grovesmere |
|
||
|
i have just replaced the motor & gearbox in my eb now the injectors are pouring too much fuel in .. i have changed the computer..no go;....before i pulled it down , it doubled its fuel consumption, virtually overnight....anybody got any clues? cheers bill
|
||
| Top | |
||
| SWC |
|
||
|
What injectors are in it?
Did you crush your Fuel Reg when you did the motor? Is your O2 sensor ok? Is your MAP Sensor connected? |
||
| Top | |
||
| grovesmere |
|
||
|
appreciate your feedback guys ...injectors are eb stock standard... have replaced m.a.p. sensor..and i am a bout to replace o.2 sensor[it looks ok] but bear with me , i:m just a busted a... plumber, where is the fuel reg??..cheers bill
|
||
| Top | |
||
| Papa Smurf |
|
||
|
{USERNAME} wrote: appreciate your feedback guys ...injectors are eb stock standard... have replaced m.a.p. sensor..and i am a bout to replace o.2 sensor[it looks ok] but bear with me , i:m just a busted a... plumber, where is the fuel reg??..cheers bill At the end of the Fuel rail, has a vacuum line running into it and a pipe screwed into the rail near the Reg.  If nothing helps, try getting some new seals for the Injectors and change them, I bought a set of these for my AU, you may need to contact them to see if the seals can be used on your injectors. {DESCRIPTION} |
||
| Top | |
||
| grovesmere |
|
||
|
thanks for your in put guys!! problem turned out to be, the brown relay, behind the battery..replaced it,then put the throttle flat to floor,,like we used to do with a flooded motor ...away it went................cheers busted a...e bill
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |