|
| Kooka43 |
|
||
|
I have just swapped clusters as per the Technical sheet , from Mid range to high range making the adjustments required.
It is an 89 EA S Pac 6cyl auto Cluster is of 89 NA Fairlane 6cyl auto I have now encountered 3 Problems 1st.... LED readout does not work. 2nd... Fuel gauge doesnt work. 3rd... The Data sheet does not cater for a plain yellow wire on the EA wiring, thus this wire does not have a home. Anyone have any ideas..? thanks... Last edited by Kooka43 on Thu Dec 15, 2005 4:03 pm, edited 2 times in total. |
||
| Top | |
||
| altedxr6 |
|
|||
|
Hi, welcome to fordmods, What car? ...
|
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
he says its for a 89 EA S pack. You think you have problems now, just wait until you have to wire up the door ajar sensors!
_________________ ^^^ What He Said
|
||
| Top | |
||
| Kooka43 |
|
||
|
The door ajar sensors are the easy bit...... a wrecker and the appropriate model .... simply remove the existing wiring from the wreck.
|
||
| Top | |
||
| fordzatmyplace |
|
||
|
{USERNAME} wrote: The door ajar sensors are the easy bit...... a wrecker and the appropriate model .... simply remove the existing wiring from the wreck.
Not what I have heard. Apparently you have to install a high series (green) BEM as well.
_________________ ^^^ What He Said
|
||
| Top | |
||
| Kooka43 |
|
||
|
door wiring off an existing na fairlane worked well with no modifications.... main concern is the 3 probs listed...
And now what makes it worse is speedo and ap meter of the mid range cluster now dont work when i have put that back in..... the hassles lol |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 45 guests |
