|
| lukehemmings |
|
||
|
Does anyone know how i can run a flashing LED up to constant 12V power. I basically want it to turn on when i lock the doors and off when they're unlocked.
|
||
| Top | |
||
| mr_sperm1 |
|
|||
|
isn't that what the smartlock light does? i know it isn't just an unlock-lock thing but why do you want one of them? fake alarm system? if so, just switch it!
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| EBGizmo |
|
|||
|
Have you got factory central, or aftermarket?
_________________ EF II Sedan
|
|||
| Top | |
|||
| EBGizmo |
|
|||
|
If you have factory central, open your front passenger side door, slide the rubber boot off where the door lock wires go thru the door jam, and locate the Yellow/Black wire. This gets negative 12V when the doors get centrally locked. Connect this wire to the negative side of a 12V LED, supply the Positive lead of the LED with constant 12V, and Bob's your uncle
_________________ EF II Sedan
|
|||
| Top | |
|||
| lukehemmings |
|
||
|
{USERNAME} wrote: If you have factory central, open your front passenger side door, slide the rubber boot off where the door lock wires go thru the door jam, and locate the Yellow/Black wire. This gets negative 12V when the doors get centrally locked. Connect this wire to the negative side of a 12V LED, supply the Positive lead of the LED with constant 12V, and Bob's your uncle
Oh sweet man, exactly what i was after, so it will flash only when the central locking is activated? |
||
| Top | |
||
| EBGizmo |
|
|||
|
According to my Haynes manual, it does
Can post schematic if you need it.
_________________ EF II Sedan
|
|||
| Top | |
|||
| kday |
|
|||
|
yep it's easy, i have done the same to my car and it works really well
especially at night, you can easily see if your cars locked from a distance
_________________ Now With: HID LowBeam (Fkn Bright!)
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
