Ahhh WTF!

got the old premium out, modified the brackets (deck fits perfectly stoked).

anyways, i soldered the wires for the rear speakers from my deck to that of the car (the 4 wires that come from a seperate plug). AND THERE IS NO REAR SOUND!!

O.K i just searched and found that my car has an amp...i didnt realise haha.

Whats the story.... i allready have a pioneer 300W amp and kicker sub wich are going in. obviously amp runs off battery and sub ports behind my deck (pioneer DEH-P7750MP)....easy

can i also run this factory amp, for the rear speakers....if so will it sound better than being powered by the deck, and how do i go about hooking this up?

cheeers

Dont run the factory amp, its got stuff all power and it needs an 6 or 8v signal to turn on and your headunit has a 12v signal..... My suggestion is to get a new amp

cheers mate, i assumed it would have stuff all power....

how can i just run the rear speakers off my deck then?

As there is no factory wiring to the rears u will have to extend the rear speaker cables from the back of the headunit to the rear speakers.

i mean both. a soldering iron and a welder were used

Gosh i love ford!!

went to repco bought me self some nice wire to hook up the rear speakers...got in the boot to have a look around and noticed two plugs neatly ziptied to the wiring from the amp?? recognizing the wire color from the front i plugged them into the rear speakers...and whullla rears speakers worked!!