|
| kizzer |
|
|||
|
hey all.
i had an Autometer Autogauge tacho in my ef mont i just ripped it out and put it in exactly the same way in to my gf's el mont and it was working fine. after i put all the dash back together i started the car again and the tacho was reading 300rpm higher then it should have been. now when i rev it the rpm difference gets bigger as the car revs. does anyone have an idea of what the go is?
_________________ 1995 EF Fairmont with all the Gear. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
is there a switch at the rear of the guage?
you might have bumped the switch from 6 cyl into 4 cyl.? as that would make it higher than normal.. |
||
| Top | |
||
| xcabbi |
|
||
|
Is your ignition input directly from the ECU or the coil. That would be your problem right there if you took it from the coil.
|
||
| Top | |
||
| kizzer |
|
|||
|
im taking the reading from the fuse box thingo
theres no switches for 4,6,8 on the tacho as i have another sitting on my lap now....
_________________ 1995 EF Fairmont with all the Gear. |
|||
| Top | |
|||
| kizzer |
|
|||
|
all good.
on the back theres wires that loop to select 4,6,8 musta snapped it
_________________ 1995 EF Fairmont with all the Gear. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
{USERNAME} wrote: all good.
on the back theres wires that loop to select 4,6,8 musta snapped it numbuts 
_________________ RIP SCOTT |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 20 guests |
