|
| Tezza393 |
|
|||
|
hey,
does anyone know how many liters are in the sump to read full i have a stock 351 sump and they dont come with dip stick's or holes as they go through the timing cover, i am using the reverse rotation timing cover so obviously it doesnt have this hole so as i stated before, i am looking for the amount of liters that sit in the sump to read full on the stick, Cheers for your time, any advice is welcome Tezza
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Depends on the sump. stock is about only 4.5L
Check my 351w into XE post it shows the HE sump I got. It has a side mounted dipstick much like a 5.0 Falcon pan. In fact I would have preferred the 5.0 dipstick boss mounted in the 351 pan. |
||
| Top | |
||
| Tezza393 |
|
|||
|
The plan is to find the full mark and weld in a custom dipstick tube into the pan on the side like the 5.0L pan, i believe its a front pickup Bronco sump, will have to be modified to suit the NL K frame i think, will see how it goes when i can get time to drop it into a Frame, looking for a donor but they just dont come around, but one thing at a time for now,
their is always one issue after another Cheers for the info Pete Tezza
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Don't use the F-series/bronco sump. You want an XW type front sump or just get one from HE like I did already made up. Just make sure they don't make angled wings on the sump like they did to mine....I then had to modify it to make it fit an E-series.....you gotta keep on top of idiots!
|
||
| Top | |
||
| 351EL |
|
||
|
Mine came without a dipstick hole also. I just measured up the 5.0 sump, cut a hole in the 351 sump, drilled out the riverts in the 5.0 dipstick tube mount and bolted the mount to the351 sump.
_________________ Smoken the hides in top gear |
||
| Top | |
||
| Tezza393 |
|
|||
|
hahahaha awesome to hear
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
