|
| Scaffy |
|
|||
|
Cool, I have no idea what's what, but it would make sense. When looking through the NGK book I also noticed that if there was a -11 it had gap-size as 1.1mm, -12 as 1.2mm and so on, but there were a couple where the -1 had a gap size of 1.4mm which then just confused me...
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
I use NGK BPR6EFS BPR7EFS would be the std plug for n/a engine ??
BPR6EIX-10 iridiums The TFS heads use the same as GT40 / GT'P heads... They are longer the E7 plugs..
_________________ As in ZOOM 126 edition Last edited by EBXR8380 on Mon Apr 14, 2008 1:18 am, edited 3 times in total. |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I've got no idea what goes into the standard engine. I'm pretty sure I have to use these plugs because they need to be a little bit longer due to the design of the head.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| green car |
|
||
|
What the! Id go back and have a go at the idiots who installed it
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| EBXR8380 |
|
|||
|
{USERNAME} wrote: I've got no idea what goes into the standard engine. I'm pretty sure I have to use these plugs because they need to be a little bit longer due to the design of the head.
CORRECT the E7 heads used shorter plugs but TFS, AFR , Ford GT heads are the same plug length..
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I just pulled all the plugs out again to change them. No more fouling, but they all look like they're rusted. There was no sign of this before when I had them out on Saturday. I can't see how they'd be rusty as there's no water in my engine... I hope!!!
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| BOTTLEDUP |
|
|||
|
Ultimate 98 leaves a rusty brown residue when its running too rich...
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| Scaffy |
|
|||
|
Ah ok, that's a good sign then, kinda. I use Ultimate. I guess I need to sort out the richness.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
