|
| itlookslikeaxr6 |
|
|||
|
The things we find when fixings small issues...
Good to hear all is good and well, hope it stays like for a while. Regards.
_________________
|
|||
| Top | |
|||
| BenJ |
|
||
|
Saturday was My Birthday!!!
And I asked my fabulous family for only one thing. A new trolley jack. My previous one, which I was given on my 21st, many years ago, died earlier in the year, and I have been struggling to do things with just the scissor jack. Which really sucks. So my wife, son and daughter pooled there $$$$ and I ended up with this.   This is a Trade Quip Hydraulic Floor Jack, and has a low profile 105mm min height and goes up to 510mm high. The jack has a 2T capacity and usese dual hydraulic rams, and the handle is also the release mechanism. It is very sturdy, but bloody heavy at 51kg. So I made good use of it yesterday, and used it to lift up the back of the Wagon so I could replace the centre bump stop over the pinion. I had been getting a good loud squeak when carrying a few people and dogs. This is why.  If you look closely, you can see where the pinion dust cover had been chewing into the bump stop. LOL, the joys of having a lowered wagon. When I bolted in the replacement bump stop, I turned it 180 degrees, which gained me 10mm away from the pinion, so hopefully, this issue won't happen again.  Cheers Old Man BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| XR-Lane |
|
|||
|
Happy birthday mate
 Thats a nice looking trolley jack if ever I seen one. Have you resigned as Cruise Mod, your rank has changed? Cheers |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
That's a sexy looking jack, should make light work of jobs you need a jack for now.
 That diff bump stop - never seen one chewed out like that, usually the rubber get's too soft. I have one in my EB Ghia, otherwise the tailshaft hits the floor.  I have got 18mths out of my current one, and a similar amount of time out of the previous one, but i do a lot of towing, big heavy loads....Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
A belated Happy Birthday Ben, I am glad you got something nice from the family. I have a jack that is less than adequate and I also use the standard Ford jack.
I might have to invest in one of them, I can't depend on MY Family to do same. |
||
| Top | |
||
| dahayes |
|
||
|
Good score with the jac mate Happy Birthday
|
||
| Top | |
||
| Mad2 |
|
|||
|
Hi, i like the look of the front with the BA parts. would love to do what ya seen doing with parts swap .... but with 5 ea sedans & 2 ea/eb wagons it looks like i'll be using those parts up.
like you Benj i bought a wagon [93 off ebay] on gas [in date too!] however the motor appears to have a leak around the balancer  so i will swap the motor/box out of the '88 [3.9/5sp $290 approx] & put orig motor/box aside. oh '88 came with a lsd  ratio 2.92 [wouldnt mind the sedan lsd tho .. 3.23]keep up the good work & the pics it might 'motorvate' me  
|
|||
| Top | |
|||
| itlookslikeaxr6 |
|
|||
|
Don't think you will find a 3.23 LSD from factory.
o for a 3.45. Cars looking great BenJ hope those wheels are still crack free, a mate of mine had one of his crack. Regards.
_________________
|
|||
| Top | |
|||
| BenJ |
|
||
|
{USERNAME} wrote: Don't think you will find a 3.23 LSD from factory. o for a 3.45. Cars looking great BenJ hope those wheels are still crack free, a mate of mine had one of his crack. Regards. Actually, my wagon has the 3.23 LSD from factory as it is a Ghia. Does your mate want to part with his remaining wheels? Cheers BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| itlookslikeaxr6 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Don't think you will find a 3.23 LSD from factory. o for a 3.45. Cars looking great BenJ hope those wheels are still crack free, a mate of mine had one of his crack. Regards. Actually, my wagon has the 3.23 LSD from factory as it is a Ghia. Does your mate want to part with his remaining wheels? Cheers BenJ I clearly have more to learn.... Ill ask him and PM you the out come.
_________________
|
|||
| Top | |
|||
| SLO247 |
|
||
|
{USERNAME} wrote: Don't think you will find a 3.23 LSD from factory. o for a 3.45. Cars looking great BenJ hope those wheels are still crack free, a mate of mine had one of his crack. Regards. Boxcar Ghias pretty much all had 3.23 LSDs! Just XR's that had 3.45s. The Prowlers are terrible for cracking.... I imagine alot of people end up with three wheels. |
||
| Top | |
||
| huggiebear |
|
|||
|
{USERNAME} wrote: Don't think you will find a 3.23 LSD from factory. o for a 3.45. Cars looking great BenJ hope those wheels are still crack free, a mate of mine had one of his crack. Regards. my fairlane came factory fitted with a 3.23 LSD |
|||
| Top | |
|||
| bArNsY |
|
|||
|
ED and NC Fairlane (Ghia) & DC (LTD) Series 2 usually had 3.27 LSD.
_________________ FG G6E Turbo |
|||
| Top | |
|||
| ausedwagon |
|
|||
|
ive just found a ed wagon diff 3.45 lsd........ should be nice..
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| BenJ |
|
||
|
{USERNAME} wrote: ive just found a ed wagon diff 3.45 lsd........ should be nice.. Must be out of an XR6 Wagon. That will make it more fun to drive. Cheers BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
