Fordmods Logo

Daniels EL XR6 build 

 

Page 25 of 40 [ 588 posts ] Go to page Previous  1 ... 22, 23, 24, 25, 26, 27, 28 ... 40  Next

 
 Post subject: Re: Daniels EL XR6 build
Posted: Thu Nov 17, 2011 11:57 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

ok so i picked up a low k au motor just standard car it came out of was in a front on crash so afew things where broken on it.so i swapped everything over inlet manifold,sump,dizzy,alternator, idler pully etc and also changed majority of the seals and gaskets on the motor

i also bolted in my high stall and did a service on the transmission.will post pics up tomorrow.car should be up and running tomorrow.so will see how she goes

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:08 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

Well I've got it all up and running today Thanks to my dad,lol.timed it up and everything drives beautifully just not sure how the high stall is supposed to work properly?? Its a 2500rpm one I don't know if there's anything speacial to do to get it going properly because I tried to stall it up to 2500 but couldn't make it past 1800rpm without wheel spinning. And even just normal driving it feels pretty much the same :? Any one have any clues?? Will post pics once on the computer

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:14 pm 
Technical Contributor
Offline

Age: 66

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Sounds like you have a stock stally.
Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:17 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

You reckon?? Could you tell by looking at it if it was or not??

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:22 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

yeah man probably got sold a standard one

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:29 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

well f**k me i hate buying threw this s**t cant trust any C*** on here mate!!!

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:48 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

who did you buy it off, and what did he say, did it look the same as the standard one you took out of the car?

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:51 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

well unless there's a way to "dial it in" or something then yeah i got screwed $300 ill give him a call see what he says.

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:53 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia

pretty sure a stall convertor will bring up a problem with the ecu and it will go into limp home mode best to check with someone else though , dont jump to the ripped off conclusion yet but mate,

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 5:59 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

bry40l wrote:
who did you buy it off, and what did he say, did it look the same as the standard one you took out of the car?


i bought it off a bloke on here his names ringastinga seemed like a really top bloke didnt seem like the type to rip some one off i mean it looked pretty much same as my one except it was purple and 2500rpm writen on it.
here's the link: ford-parts-for-sale-f17/fs-j3-chip-torque-converter-and-auto-trans-t108233.html

bry40l wrote:
pretty sure a stall convertor will bring up a problem with the ecu and it will go into limp home mode best to check with someone else though , dont jump to the ripped off conclusion yet but mate,


well thats what i mean i dont know if its just playing up or not but i filled the auto like three times full of oil topped up the converter then took it for a drive and tried to stall it up and ones it touched the line after 1500 started spinning.

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sat Nov 19, 2011 7:37 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

All good just took it for another drive seems to go alright now lmaoo

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Nov 23, 2011 10:56 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

well finally got my computer and iphone to work together again so i can finally post up pics :) yayyy!!

just the car:

Image

Image

Image

here's afew with the angel lights:

Image

Image

Image

Image

Image

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Wed Nov 23, 2011 11:02 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

and i took afew snaps of the heart transplant

new motor done 105,000km:

Image

Image

Image

car jacked

Image

fitting the motor and tranny back in:
Image

Image

Image

gear on the dizzy was rooted,the one in the engine was 10 time worse

Image

Image

Image

motor goes well now

Image

stay tunned will have more to come soon :)

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Sun Dec 11, 2011 11:33 pm 
Getting Side Ways
Offline

Age: 31

Posts: 1260

Joined: 11th Dec 2010

Ride: EL xr6

Location: Craigieburn
VIC, Australia

Well just an update I finally sprayed and fitted my tikky kit just need to do the spoiler I kinda ran short on paint :P also fitted some new tyres to 2 of my rims, tyres were rotted baaad!! Will upload pics soon .

 

_________________

EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high

My Build: the-garage-f53/daniels-el-xr6-build-t100586.html

Top
 Profile  
 
 
 Post subject: Re: Daniels EL XR6 build
Posted: Mon Dec 12, 2011 1:38 am 
Tyre Shredder
Offline
User avatar

Age: 32

Posts: 397

Joined: 16th May 2010

Ride: 2010 G6E

Location: Melbourne
VIC, Australia

lookin good, backyard heart transplant, someones gotten confident. :wink:
do mine now? lol
awesome massive nos bottle you got going, lol.

 

_________________

be good or be good at it.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 25 of 40  [ 588 posts ]  Go to page Previous  1 ... 22, 23, 24, 25, 26, 27, 28 ... 40  Next

Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Jun 16, 2024 1:35 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names