Fordmods Logo

airbag code 19 SY territory 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: airbag code 19 SY territory
Posted: Mon Jan 06, 2014 3:14 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia

Hi Guys,

recently brought the mrs a sy tezza and today it flashed up a code on the airbag light. either 19 or 91.

so far it might be related to the clock spring or airbag itself.

if so, is the ba/bf falcon clock springs the same as the territorys?

and if i have the code definition wrong can somone that may know correct me? thanks.

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.

Top
 Profile  
 
 
 Post subject: Re: airbag code 19 SY territory
Posted: Thu Jan 09, 2014 7:28 pm 
Technical Contributor
Offline

Posts: 492

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

Code 19 is a general flash code for front airbags - can be drivers or passengers side even if no passenger airbag,will have a resistor fitted instead of airbag which can open circuit - advice to get scanned as this will give you the correct side - ring spare parts regarding suitability of BF clockspring etc.which I think is same......
Top
 Profile  
 
 
 Post subject: Re: airbag code 19 SY territory
Posted: Mon Jan 13, 2014 1:41 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia

cheers for the reply.

only reason im thinking clock spring is when i searched there is only a couple threads and they say very likely clock spring or maybe a loose connection.

also i noticed the other day when the terry was started it was fine but as soon as the steering wheel was turned the airbag light started flashing. maybe coincidental?

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.

Top
 Profile  
 
 
 Post subject: Re: airbag code 19 SY territory
Posted: Wed Jan 15, 2014 9:13 pm 
Technical Contributor
Offline

Posts: 492

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

Indicates faulty clock spring , suggest checking with spare parts but as far as can recall was same as bf , make sure to centre steering and clock spring so that clock spring does not tighten to much when turning wheel and break . disconnect battery for 30 minutes or so before working on airbag systems. Note... Light should go out but code will remain in memory of module need scan tool to clear but airbag should operate normal....
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 15, 2017 4:19 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names