I am just trying to identify a module inside the drivers ive kick panel its mounted there with bolt and has a whte plug in the bottom off it, i am having some issues with the sunroof not remaining open for more than five seconds and also the drivers side door lock i was thinking it may be for one or the other
as there are bout five wires cut and a 3 pin male plug that doesnt have a corresponding plug to go in and also three fuses...
any help would be appreciated..
I have added a couple of photos

 

 

Attachments:

DSC00775.jpg [ 5.25 KiB | Viewed 967 times ]

DSC00774.jpg [ 5.94 KiB | Viewed 997 times ]

iTS A FACTORY FORD ALARM AS IT HAS FORD ON THE BOX AND A TRIM POT TO ADJUST SENSOR SENSITIVITY,,
I HAVE DISCONNECTED IT AND PLUGGED THE TWO PLUGS IN TOGETHER WHICH WERE BY PASSED BY THE ALARM/SENSOR AND NOW THE SUNROOF DOESNT CLOSE AFTER 5 SECONDS LIKE IT PREVIUSLY DID.., I JUST HAVE TO CUT THE SIX WIRES IT GETS POWER FROM AND LIGHTS UP THE INDICATORS FOR IT TO BE DELETED PERMANANTLY..
NO I DONT AS THERE IS A SECOND SET OF PLUGS WICH I PULLED AND JOINED WITH THE 2 PULLED ENDS TOGETHER AFTER CHECKING MY OTHER DF TO SEE IF IT WAS THE SAME WHICH IT WAS, SO I DIDNT HAVE TO CUT ANYTHING AND NOW I CAN USE THE LOOM FROM THE s**t FORD ALARM (WHICH IS MADE BY VISION IN 93.WHAT TIGHT a*** FORD ARE TO USE AN OLD ALARM FROM 93 IN A 97 MODEL PROBABLY SURPLUS STOCK)
THE PHOTO SHOWS THE FOUR PLUGS WHICH ARE CIRCLED , ALSO THE ALARM ...
IF YOU CANT SEE THE CIRCLES ITS THE TWO WHITE PLUGS IN TOP LHS AND THE TWO SMALLER BLACK ONES IN THE BOTTOM RIGHT...
HOPEFULLY THIS SOLVES MY NO START ISSUE...

 

 

Attachments:

DSC00817.jpg [ 10.99 KiB | Viewed 894 times ]