Fordmods Logo

ED manual 6 smartlock problem what wires to bridge 

 

Page 2 of 3 [ 33 posts ] Go to page Previous  1, 2, 3  Next

 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 12:08 pm 
Oompa Loompa
Offline

Age: 30

Posts: 45

Joined: 19th Mar 2012

Ride: Ed manual

Location: Townsville qld
QLD, Australia

Ok so its the smartlock plug im looking at so what should i do join 25 and 18 even though there not the right colours or is there another way to bridge it from some were like the ecu? I have no idea why this plug is different this is my first ford i am a holden man and i thought id take a chance on the fird name maybe i was wrong
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 12:16 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

take a pic of the plug if you can..
it has to be done at the smartlock module as there is a starter in and starter out, the smartlock module is the switch..

check for voltage at pin 25 while trying to crank the engine, if there is 12v while trying to crank and no voltage when not cranking i would say the pins are the same just the wires are different colours...

just curious, what is your ed? gli, fairmont , xr6 ect????
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 1:29 pm 
Oompa Loompa
Offline

Age: 30

Posts: 45

Joined: 19th Mar 2012

Ride: Ed manual

Location: Townsville qld
QLD, Australia

Gli clasic buddy
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 4:15 pm 
Oompa Loompa
Offline

Age: 30

Posts: 45

Joined: 19th Mar 2012

Ride: Ed manual

Location: Townsville qld
QLD, Australia

Image

thats the plug side 14 to 26 14 starts on the right side
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 4:19 pm 
Parts Gopher
Offline

Age: 26

Posts: 63

Joined: 11th Mar 2012

Ride: 1992 falcon eb xr6

Location: daylesford
VIC, Australia

Will it start?

 

_________________

1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw

Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 4:32 pm 
Oompa Loompa
Offline

Age: 30

Posts: 45

Joined: 19th Mar 2012

Ride: Ed manual

Location: Townsville qld
QLD, Australia

nope the smart lock light flashes and it dont crank
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 5:04 pm 
Parts Gopher
Offline

Age: 26

Posts: 63

Joined: 11th Mar 2012

Ride: 1992 falcon eb xr6

Location: daylesford
VIC, Australia

with the car fully off dose it flash if so when,u turn the key onto accsesories dose the smart lock light stay on for like 5 secs?

 

_________________

1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw

Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 5:05 pm 
Parts Gopher
Offline

Age: 26

Posts: 63

Joined: 11th Mar 2012

Ride: 1992 falcon eb xr6

Location: daylesford
VIC, Australia

with the car fully off dose it flash if so when,u turn the key onto accsesories dose the smart lock light stay on for like 5 secs?

 

_________________

1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw

Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 5:07 pm 
Oompa Loompa
Offline

Age: 30

Posts: 45

Joined: 19th Mar 2012

Ride: Ed manual

Location: Townsville qld
QLD, Australia

Yeh then if i keep trying it starts to flash
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 5:14 pm 
Parts Gopher
Offline

Age: 26

Posts: 63

Joined: 11th Mar 2012

Ride: 1992 falcon eb xr6

Location: daylesford
VIC, Australia

U sure its not the park nuetral switch?

 

_________________

1992 falcon eb manual xr6 minor head work j3 chip tuned to a el xr6 manual ecu pushing 130rwkw

Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 5:31 pm 
Oompa Loompa
Offline

Age: 30

Posts: 45

Joined: 19th Mar 2012

Ride: Ed manual

Location: Townsville qld
QLD, Australia

Its manual
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 6:42 pm 
Oompa Loompa
Offline

Age: 30

Posts: 45

Joined: 19th Mar 2012

Ride: Ed manual

Location: Townsville qld
QLD, Australia

Dose that plug pic work ok troyman
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Thu Mar 22, 2012 6:51 pm 
Moderator
Offline

Posts: 14513

Joined: 7th Nov 2004

Ride: ford falcon au3 xr8

Location: a shit suburb in sydney
NSW, Australia

yea the pic worked...

did you test pin25 while turning the key to crank to see if there is any power?..
another thing you could do is look at the wires that goes to the starter relay to see what colour they are...

my whole starter curcuit (engine crank) from relay through the loom to the smartlock module and to the ignition switch is all red/blue...
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Fri Oct 26, 2012 1:39 am 
Fordmods Newbie
Offline

Age: 30

Posts: 15

Joined: 5th Jul 2012

Ride: ford

Location: adelaide
SA, Australia

Hi having same problem with my 94 fairlane it won't crank over but turn accessories on run a wire from batter with button to starter and it will start have tried the relays nothing are u suppose to bridge pin 18 an 25 to start it or just test them with voltmeter unsure or any other helpful tips and if I keep the button how would I solve problem of slow crank
Top
 Profile  
 
 
 Post subject: Re: ED manual 6 smartlock problem what wires to bridge
Posted: Sat Oct 27, 2012 2:50 am 
Fordmods Newbie
Offline

Age: 30

Posts: 15

Joined: 5th Jul 2012

Ride: ford

Location: adelaide
SA, Australia

Any 1 got an idea would help ASAP pleasssssssse
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 3  [ 33 posts ]  Go to page Previous  1, 2, 3  Next

Who is online

Users browsing this forum: johny23 and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 17, 2017 7:19 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names