Fordmods Logo

ef/el wiring harness, what plugs in & works with each other 

 

Page 1 of 1 [ 2 posts ] 

 
 Post subject: ef/el wiring harness, what plugs in & works with each other
Posted: Wed Jan 17, 2018 9:28 pm 
Stock as a Rock
Offline

Age: 31

Posts: 168

Joined: 6th Aug 2014

Ride: ford

Location: yorke peninsula
SA, Australia

hi everyone.

thinking of converting a ef fairmont to a v8 but will need to swap some wiring harnesses for other reasons too wether it happens or not.

oneday plan to finally wire up the door ajar sensors and was thinking of using fairlane floor harness and wondered if the nl fairlane floor harness will plug into a ef dashboard, inside behind dash firewall and engine bay harnesses, 2nd option is will a el ghia floor harness plug in ef dash and engine bay harnesses if you graft the door ajar sensor wiring.

with this behind dash harness on firewall on inside can you remove the 6 cyl one and fit the v8 one and will the plugs plug back in the way the old one did with the tcm plug just sitting there until the conversion day. and when grabbing the v8 one does it have to be out of a high series model or are they all same. and are they same between ef/el model.

will a nl fairlane or el ghia floor harness and el dashboard (part that plugs into speedo and bcm and dashboard bits) harness work with a ef engine bay harness and ef behind dash harness.

and is the v8 engine bay harness same between ef and el model.

if the v8 conversion goes ahead want to do as much preperation as possible while still having things work.

have a el fairmont dash harness in the shed in a box out of a v8 fairmont and only got the dashboard part that plugs into the bcm and speedo and think that part might be same as the 6cyl one.

didnt get the other part wich turns out that is the peice that has the tcm plug and was going to get a el ghia floor harness and graft the door ajar sensor wiring in or nl fairlane floor harness and wondered if that combo would work with the ef behind dash and engine bay harnesses.

will the ef climate control panel and trip computer work in the el model because like the black buttons and the el has grey

will a el v8 ecu work with ef ecu wiring and same other way

if anyone is able to help with any answers thatd really help alot

thanks
Top
 Profile  
 
 
 Post subject: Re: ef/el wiring harness, what plugs in & works with each other
Posted: Sun Jan 28, 2018 5:14 pm 
Parts Gopher
Offline
User avatar

Age: 42

Posts: 94

Joined: 30th Aug 2012

Gallery: 7 images

Ride: EF11 Gli , EF Mont

Location: Melbourne
VIC, Australia

car10001 wrote:
hi everyone.

thinking of converting a ef fairmont to a v8 but will need to swap some wiring harnesses for other reasons too wether it happens or not.

oneday plan to finally wire up the door ajar sensors and was thinking of using fairlane floor harness and wondered if the nl fairlane floor harness will plug into a ef dashboard, inside behind dash firewall and engine bay harnesses, 2nd option is will a el ghia floor harness plug in ef dash and engine bay harnesses if you graft the door ajar sensor wiring.

( short answer no. the big a*** white connection plug behind the drivers kick panel is different and the dash loom to the cluster has different plugs. the left side is a 2 plug)

with this behind dash harness on firewall on inside can you remove the 6 cyl one and fit the v8 one and will the plugs plug back in the way the old one did with the tcm plug just sitting there until the conversion day. and when grabbing the v8 one does it have to be out of a high series model or are they all same. and are they same between ef/el model.

will a nl fairlane or el ghia floor harness and el dashboard (part that plugs into speedo and bcm and dashboard bits) harness work with a ef engine bay harness and ef behind dash harness.

( nl floor harness you will have to cut and add wires from about the parcel shelf section as the reverse lights diverts up into the boot lid part of the harness. )

and is the v8 engine bay harness same between ef and el model.

if the v8 conversion goes ahead want to do as much preperation as possible while still having things work.

have a el fairmont dash harness in the shed in a box out of a v8 fairmont and only got the dashboard part that plugs into the bcm and speedo and think that part might be same as the 6cyl one.

didnt get the other part wich turns out that is the peice that has the tcm plug and was going to get a el ghia floor harness and graft the door ajar sensor wiring in or nl fairlane floor harness and wondered if that combo would work with the ef behind dash and engine bay harnesses.

will the ef climate control panel and trip computer work in the el model because like the black buttons and the el has grey

(should do)

will a el v8 ecu work with ef ecu wiring and same other way

if anyone is able to help with any answers thatd really help alot

thanks
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Sep 20, 2018 4:14 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names