Fordmods Logo

How to programe Remote Key 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: How to programe Remote Key
Posted: Sun Apr 24, 2016 11:36 pm 
Getting Side Ways
Offline

Age: 57

Posts: 909

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Eagleby
QLD, Australia

Hi,

I have a Ford AUII.

How does one programme the Remote Keys to work.

I've looked at the post regarding BA's

I done what was said, and still the remote keys don't work, doors don't cycle . yes, I did press the Rear Demister button 3 times within 5 seconds.

Am I doing something wrong or are AUII's have a different way to be programmed?

Cheers
Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Mon Apr 25, 2016 8:00 am 
Getting Side Ways
Offline
User avatar

Posts: 2399

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

what did you do when trying to set remotes?. when doing mine i had to do it a few times before it worked
Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Mon Apr 25, 2016 10:46 am 
Technical Contributor
Offline

Age: 59

Posts: 6810

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

You are using the correct procedure.

As Mad2 has said, it sometimes takes a few trys to get it to got into program mode.

 

_________________

SWC

South West Customs


Members of the SWC Stable, fordebgt93, TROYMAN, Benj, svo_matt, Mrs C, eb_fairmont, Total_tool, Terroristghia

Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Mon Apr 25, 2016 9:46 pm 
Getting Side Ways
Offline

Age: 57

Posts: 909

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Eagleby
QLD, Australia

G'day I'm sure I did.

Procedure I used is this

1. Close all doors.
2. Turn key to ACC
3. Press demister button 3 times within 5 seconds
4. Press "Open door icon" on remote. Doors should cycle open and close
5. Repeat step for second remote.
6. Good to go.

Or should I pressing the demister button as in 3 cycles within 5 seconds i.e. Press 1 light on, press 2 light off, press 3 light on, press 4 light off, press 5 light on, press 6 light off , within 5 seconds.
Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Mon Apr 25, 2016 9:56 pm 
Smokin em up
Offline
User avatar

Age: 34

Posts: 257

Joined: 24th Jun 2014

Gallery: 4 images

Ride: BA XR6 Turbo

Location: Jamestown
SA, Australia

bondy99 wrote:
G'day I'm sure I did.

Procedure I used is this

1. Close all doors.
2. Turn key to ACC
3. Press demister button 3 times within 5 seconds
4. Press "Open door icon" on remote. Doors should cycle open and close
5. Repeat step for second remote.
6. Good to go.

Or should I pressing the demister button as in 3 cycles within 5 seconds i.e. Press 1 light on, press 2 light off, press 3 light on, press 4 light off, press 5 light on, press 6 light off , within 5 seconds.


Its just the 3 fast presses in 5 seconds press press press
The door locks should cycle to indicate learning mode has been entered.

try doing what you have but waiting 5 or 10 seconds before you press any buttons on the remotes.

 

_________________

Current Ride
BA XR6 Turbo, P3 Paint, BP Trim, Fully Stock Mods to Come!
1996 EF Falcon furura, White.
BA XR6 , P3 Paint, BG Trim, crashed in front but thinking of fixing!

BLUE BLOOD
Previous Rides
1997 EL Falcon
1980 Ford Escort

Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Mon Apr 25, 2016 10:59 pm 
Getting Side Ways
Offline
User avatar

Posts: 2399

Joined: 22nd Jan 2009

Ride: '91 EB Wagoon

Location: Geeelong
VIC, Australia

bondy99 wrote:
G'day I'm sure I did.

Procedure I used is this

1. Close all doors.
2. Turn key to ACC
3. Press demister button 3 times within 5 seconds
4. wait for door locks to cycle
if no - turn off key & try again
if yes - proceed to next step
5. Press "Open door icon" on remote. Door locks should cycle close and open
6. Repeat previous step for second or more remotes [up to 8?].
7. finished turn vehicle off & exit vehicle.

Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Mon Apr 25, 2016 11:16 pm 
Getting Side Ways
Offline

Age: 57

Posts: 909

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Eagleby
QLD, Australia

Hi,

Ok, i'll do that next time (tomorrow morning).

Question regarding ACC. Is that the position prior start as in run?

The ACC position indicator is either worn off or is not marked on my ignition switch.

Cheers
Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Mon Apr 25, 2016 11:43 pm 
Technical Contributor
Offline

Posts: 446

Joined: 13th Jul 2013

Location: Campbelltown
NSW, Australia

acc. is one position up from lock position-
one position before reds
push demist within 5 sec of turning to acc
wait a couple of sec after pushing demist 3 times for locks to operate

does central locking work ?
Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Tue Apr 26, 2016 8:09 am 
Getting Side Ways
Offline

Age: 57

Posts: 909

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Eagleby
QLD, Australia

@ TedW,

Thanks for your message.

I assume lock position is when the key can be withdrawn. I'm sure I had the key in acc position but will double check again.

Sorry, I don't know what "reds" is

Central locking works with the door key and opens up with the old remote key.

The old remote key's lock button no longer works. The cradle that holds the battery in position broke off sometime ago.

I've been trying to get those 2 new remote keys trained to work properly.
Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Tue Apr 26, 2016 8:35 am 
Technical Contributor
Offline

Age: 59

Posts: 6810

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia

Ignition Lock has 4 positions;

1) Off - Locked (key can be removed) no power on.
2) Acc - Accessories (key cannot be removed) power to accessories, radio, power windows etc.
3) Ignition on - Reds. Power to engine components, Dash warning lights are on, hence to reference to "REDS".
4) Start - starter motor on. Momentary contact, springs back to Ignition on when released.

 

_________________

SWC

South West Customs


Members of the SWC Stable, fordebgt93, TROYMAN, Benj, svo_matt, Mrs C, eb_fairmont, Total_tool, Terroristghia

Top
 Profile  
 
 
 Post subject: Re: How to programe Remote Key
Posted: Tue Apr 26, 2016 11:28 pm 
Getting Side Ways
Offline

Age: 57

Posts: 909

Joined: 13th Sep 2010

Ride: Ford Falcon AU 2000 Series II

Location: Eagleby
QLD, Australia

@ SWC,
Thanks for clarification.

Just to let everyone else know, finally got the two remote keys trained.

I don't know why it did not work previously but this time with the additional pause of about 10 seconds, doors cycled and remote keys tuned.

Thanks for your help.

Cheers
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Jan 24, 2017 10:10 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names