Fordmods Logo

Installing power windows in an AU2? 

 

Page 1 of 1 [ 3 posts ] 

 
 Post subject: Installing power windows in an AU2?
Posted: Sun Apr 22, 2018 10:57 pm 
Fordmods Newbie
Offline

Age: 23

Posts: 13

Joined: 12th Nov 2016

Ride: Ford Au Series 2 Ute

Location: Hobart
TAS, Australia

Hey guys,

I was just wondering on how to go with installing power windows in my Au2 Ute.

Is there a thread of how to (step by step) installation guide on here? Can some link me or if not please write below.

I’ve got everything I need including: Door trims from a sedan, wiring, p/w motor, blah blah blah.
Just needing the walkthrough guide that’s all :)
Obviously everything is from an Au2 sedan too so should be a problem right? Just wanted to be sure anyways.

Cheers.
Top
 Profile  
 
 
 Post subject: Re: Installing power windows in an AU2?
Posted: Mon Apr 23, 2018 12:06 am 
Getting Side Ways
Offline
User avatar

Age: 65

Posts: 3513

Joined: 11th Jan 2009

Ride: BA Falcon XT

Location: Smithfield
NSW, Australia

If you have everything from the sedan, all you really need to do is replace what you already have in the UTE to what you got from the sedan. The wiring harness that is already in the Ute should have the wires to hook up the power windows.
It might be an idea what you are doing this to take OFF the front doors as it will be much easier to change over the door harness and regulators.
If you look at the bottom of the page linked here, you will see pics of how to removed the doors very easy without undoing the hinges. Much easier then trying to change the parts over while the door is hooked up and also easier to get at the harness plug from the door to the body. It would also be useful to have help to hold the door.

http://www.dirtbikeworld.net/forum/show ... 371&page=4

This is ONE of the pics that will help.
Image
Top
 Profile  
 
 
 Post subject: Re: Installing power windows in an AU2?
Posted: Sat May 05, 2018 6:14 pm 
Fordmods Newbie
Offline

Age: 23

Posts: 13

Joined: 12th Nov 2016

Ride: Ford Au Series 2 Ute

Location: Hobart
TAS, Australia

So I’ve made a start but up to the wiring.

Anyone got a walkthrough with the electricals?

Driver side works but passenger side doesn’t... apparently I gotta wire two wires to the drivers side switch but which wire do I splice?

Cheers
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Sep 21, 2018 5:21 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names