|
| Mad2 |
|
|||
|
anyone know what the ohm range is for the EA/EB/ED oil pressure sender? [not the idiot style] plus what the thread is
Thanks  ps hope i put this in the right drawer......... |
|||
| Top | |
|||
| evxr6 |
|
|||
|
Not sure on the specs, but what I do know for sure is that it is VDO P/N: 360.013. Around $60 at your local auto parts store.
Need to do slight wiring mods as the terminal is slightly different.
_________________ Current ride: MY03 Liberty RX Wagon |
|||
| Top | |
|||
| Mad2 |
|
|||
|
are you sure its EA/ED??
i was under the impression that the EA/ED version was no longer available and it was only the AU version available which isn't the same ?? any way i've found a VDO unit that may/maynot be the same, hence my query |
|||
| Top | |
|||
| ranga83 |
|
||
|
there is an xg one on ebay ATM $35
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| evxr6 |
|
|||
|
Mad2 wrote: are you sure its EA/ED?? i was under the impression that the EA/ED version was no longer available and it was only the AU version available which isn't the same ?? any way i've found a VDO unit that may/maynot be the same, hence my query Definitely sure. It's the one I got for my EB and it worked perfectly. XG might be the same as it had EB running gear. Ok, after perusing the VDO catalog http://aftermarket.continental-corporation.com.au/files/5S4RP3DQQJ/VDO_Catalogue_2013_Interior_LR-6.pdf, the above mentioned sender is 10-180 ohm, 700 kPa with 1/4" NPTF thread. EF/EL is 360.045. Can't find specs on it.
_________________ Current ride: MY03 Liberty RX Wagon |
|||
| Top | |
|||
| 5h4dy |
|
|||
|
Thread: 1/4 - 18 NPT
Tridon aftermarket part number TPS069 IIRC... 
|
|||
| Top | |
|||
| 5h4dy |
|
|||
|
evxr6 wrote: Not sure on the specs, but what I do know for sure is that it is VDO P/N: 360.013. Around $60 at your local auto parts store. Need to do slight wiring mods as the terminal is slightly different. Specs on that part number should be: 700 Kpa 20-183 OHM 1/4” x 18 NPTF Thread |
|||
| Top | |
|||
| Mad2 |
|
|||
|
ok thanks peoples
turns out what i thought was one - ain't lol so i will follow up on what ya listed thanks
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
