Fordmods Logo

97 EL v8 (not Tickford) auto, ECU? 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: 97 EL v8 (not Tickford) auto, ECU?
Posted: Wed Jan 09, 2013 2:46 pm 
Fordmods Newbie
Offline

Age: 54

Posts: 9

Joined: 27th Dec 2009

Ride: Ford Falcon ED

Location: Cowes
VIC, Australia

Hi, believe it or not during the repair process to a EL V8, the ECU was removed and not returned?! Now the car sits patiently awaiting the location of an ECU. After looking around I thought that the correct ECU would be a 6DGD but it were suggested that a 4DEG could work? can anyone let me know what ECU i should be looking for and if any other one may suit. I do not know the diff ratio or whether it is factory gas but do know it is not a Tickford V8, just a windsor motor that runs on gas. Any reply is welcomed, thanks :roll:
Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Wed Jan 09, 2013 6:58 pm 
EFI Guru
Offline

Age: 58

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

6DHE,6DHD should work but there are others. 4DEG is EF and therefore fan control will be wrong.
Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Thu Jan 10, 2013 10:38 am 
Fordmods Newbie
Offline

Age: 54

Posts: 9

Joined: 27th Dec 2009

Ride: Ford Falcon ED

Location: Cowes
VIC, Australia

Nice! They seem to be a difficult box to find. I need to mention that it is a Fairlane Ghia Sedan, quite a beast really, just such a hold up missing an ECU.

The only one for sale online presently is a secondhand 6DGD for around $115 delivered to my door.
Is there anywhere you could recommend to track one down, ecenomically? I have had a look through lots of catch codes to ensure i am accurate (as normally i am an old computer tech from the 80/90's) and really liked your response. Thanks.
Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Thu Jan 10, 2013 11:09 am 
EFI Guru
Offline

Age: 58

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

No wuckers Mike, $115 is a good deal. Buy it.
Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Wed Jan 30, 2013 6:08 pm 
Fordmods Newbie
Offline

Age: 54

Posts: 9

Joined: 27th Dec 2009

Ride: Ford Falcon ED

Location: Cowes
VIC, Australia

Some sort of feedback.. :roll: Because the car had to be moved it were hotwired?(haven't seen it yet) were that worked and now with the straight fitting of the ECU (Purchased smoothly via ebay) the car just won't turn over.

My only thought is to some possible proceedure that needs to be folowed when a replacement ECU is fitted to a vehicle, i doubt it i said via phone, he replied, it seems to be an electrical fault. We'll see i say. cheers anyways. all good
Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Thu Jan 31, 2013 11:28 am 
EFI Guru
Offline

Age: 58

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

What do you mean by hotwired?
No procedure...just plug the new EEC in. With the key on engine off, can you hear the pump run or hear the fuel pump relay click on then two seconds later turn off? If not smartlock module may be faulty.
Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Thu Mar 07, 2013 3:19 pm 
Smokin em up
Offline

Posts: 270

Joined: 1st Sep 2007

Location: melbourne
VIC, Australia

Mate
If you are still chasing a ECU l have a BRAND NEW 6DHE $140 in mill park

gassa

 

_________________

When the clutch drops the bull s**t stops!!!!!

Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Thu Mar 07, 2013 5:26 pm 
EFI Guru
Offline

Age: 58

Posts: 4359

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

6DHE will do the trick.
Top
 Profile  
 
 
 Post subject: Re: 97 EL v8 (not Tickford) auto, ECU?
Posted: Fri Mar 29, 2013 11:11 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 7

Joined: 25th Mar 2013

Ride: XF 25th 351C/ EB Fairmont II

Location: Adelaide
SA, Australia

Gooday guys, I got myself an EB Fairmont Series II, currently running the 6 cyl and wish to drop the equivalent V8 in there, I wish to run auto with the V8 whats the go with the ecu and loom, etc?? can i just get any 5 litre ecu from EB to AUIII or does it have to be specific for my car such as EB- ED only? any infos will be deeply appreciated
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Apr 26, 2024 1:39 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names