|
| Autofast2 |
|
||
|
just fitted a walbro fuel pump to my au,after some info and ideas about set ups and brands,i just rebuilt the stock injectors cleaned the rail,throttle body and fitted a new filter any info would be good thanks
_________________ YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE |
||
| Top | |
||
| xr6eat 50 |
|
|||
|
I have one going on the new motor, I brazed a 90 deg barbed fitting into the back of my fuel rail so I can mount the reg off one of the bolts in the intake manifold beside the motor, mainly so it is easy to get to when we tune it and I was told the ones that actually fit the back of the fuel rail are puss.
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| Autofast2 |
|
||
|
thanks mate i heard the same thing and wasn t sure, i have a spare rail so will mod that off the car,so the fitting was brazed on were the old reg went? or you mounted the reg on the firewall and ran fuel line to the rail?
_________________ YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE |
||
| Top | |
||
| xr6eat 50 |
|
|||
|
Yeap that sound good. I am not mounting mine on the fire wall though mine willbe mounted off the BBM , but there is no reason why you can't mount it on the fire wall I have seen some mounted onto the strut tower too. good luck
_________________ EF XR6 Manual 271RWHP/199RWKW N/A using Stock manifold with dual plane runners still operating. EFI Hardware 6TBM to come mid year. |
|||
| Top | |
|||
| Autofast2 |
|
||
|
thanks
_________________ YOU CAN LIVE IN A CAR BUT YOU CANT DRIVE A HOUSE |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 6 guests |
