|
| EA-SPAC-88 |
|
||
|
Hey guys i hear that AU injectors either flow better or have a better spray pattern?
also if i was to put them into a EF do they just bolt straight in and would i need a different fuel reg so they would flow properly and not just flow the same as EF ones, Cheers, Brandon |
||
| Top | |
||
| SWC |
|
||
|
Flow rate is minimal difference. As stated above the spray pattern is much better and fuel is atomised much more efficently.
|
||
| Top | |
||
| DRHEMI |
|
|||
|
Heres what I found before I fitted them in my car
Should be straight fit  Here is some info when i researched them for my EF Quote: So i have researched injectors and as mine are 14 years old now I think its time to either get them cleaned or buy bigger and better ones
Here is what i have found:- EF-EL Injectors Bosch Part Number 0-280-150-790 149.7 g/min – these are EV1 injectors Au Injectors Bosch Part Number 0-280-155-844 150.2 g/min - these are EV6 injectors BA Injectors Bosch Part Number 0-280-156-123 213.0 g/min – these are EV6 Injectors As the AU injectors are the EV6 model with 4 pin outlet which helps to atomise the fuel better than the EV1's which only have a 1 pin outlet And also as the AU flows a little bit more I have ordered some new Bosch Genuine AU Injectors and will get them fitted tomorrow I think for the time being the BA injectors are too big for my needs Bosch Injector Specs PDF http://www.bosch.com.au/content/language1/downloads/fuelinjectors.pdf
_________________ PROEF 13.46 @ 105.78mph - 1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan |
|||
| Top | |
|||
| EA-SPAC-88 |
|
||
|
Thanks for all the quick and helpful replies, I can get Au change overs for about $170
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
